Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.7 out of 5 stars (36 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.I ordered this trailer hitch for the 2022 Chevrolet Bolt EUV without any confirmation that it would fit my 2023 redline edition euv. Well I'm here to show you that it does fit! Photos are included!
This is NOT easy to install. I ultimately took it to a Chevy service center, it took them over 2 hours and cost me $260 (with a discount). They had to cut a hole in the hitch because not all the holes lined up with the existing vehicle studs.
Brooke M.
4/16/2024
Thanks for the review! After taking a close look at the photo and verifying with Curt that this hitch is a fit for your vehicle, I am thinking that your hitch was flexed on one or both sides. That happens a lot with how rough shipping and transit can be. We see it enough that we have an article that walks you through correcting a flexed hitch. I left the link below. If you want my opinion, your service center should have tried to bend it back to the correct shape, but as long as there arent any cracks in the hitch, and the existing hole and newly drilled hole have about an inch of space between them, the integrity of your hitch wont be compromised.
Helpful Links
It took about an hour to install and has been rock solid. You do have to trim the bumper cover. I used a reciprocal saw.
I have photos… but this site doesn’t allow photos from an iPhone. Apparently the iPhone naming is a foul. A better system would just strip those characters from the file name… or, better, assign a random file name to eliminate that vulnerability entirely. Anyway… hitch is great. :)
Upload unsuccessful - File name must exclude: /, \, :, *, ?, ", <, >, _, or |
Installation instructions could be a bit better. Definitely buy trim tools and use painter's tape to protect the paint. A few plastic tabs broke off while removing the bumper... be careful and don't force it (like a [online] video I found suggested). Rack is solid!
This product worked great. Before I purchased it, I made sure that there was a video on UTube that detailed the installation process. Without that video, I would not have bought this product.
I just received this hitch and I haven't installed it yet, but after installing a Curt Hitch from etrailer on my '14 Volt, I have 100% confidence that it will fit perfectly and if I have any trouble at all, I will be able to get outstanding customer service from etrailer. That's been my experience.
nice sturdy hitch that rides well on the car, mine had one problem, the welding cause the holes to be spread too far apart for my car bolts so I had to "bend" it back to shape and saw one slotted hole larger. Otherwise its a success, even managed not to bust any plastic clips removing that giant bumper assembly.
My bending method was dropping it on the pavement on edge of bracket, which bent the part with the 3 holes that attaches to bumper bolts together enough to allow it to fit, it started out about 1/2" too far off to fit.
Insulation was simple
Easy installation and sturdy af
Hitch is great. Haven't actually used it yet but so far, very happy. Was relatively easy to install. Hardest part is making sure not to break any of the plastic parts on the Bolt EUV.
I have not installed it yet
Donald
4/5/2024
I use it for my bicycle rack I have not installed the trailer light kit as of yet. I works well for my purposes.
Perfect! It has really expanded the ability of the bolt, and can carry all the weight that might be necessary.
The trailer hitch was boxed well and delivered in perfect condition. It was installed on my 2022 Bolt EUV. I couldn't be happier.
What Was Good:
> Website, product finder, etc. made it easy to find what I needed and order it
> Installation instructions are great
> Tracking of the shipment was also good
> Post-sales support was very helpful in resolving an incomplete shipment issue
What Wasn't Good:
> Packaging was inadequate for the hitch receiver. It broke through the cardboard box, which caused the hitch adapter to be lost and the shipment to be delayed several days until someone at UPS patched the box with tape. The order arrived incomplete.
> Second shipment of the hitch adapter went well. But I’m disappointed to see the product does not include a “pin” needed to secure the adapter to the hitch receiver. I’ll have to visit Ace Hardware and improvise something.
The hitch bolted up perfectly. I bought this to put my bicycle rack on my Chevy bolt euv. The directions with the hitch are pretty weak. I used a [online] video that worked out pretty well after viewing a few of them. The tool list missed T-20 that was needed to.
Bolt cut outs did not fit properly. Had to force the bolts to align with trailer mount holes. Would have returned it but we were in a pinch and didn’t have the time to wait for another one.
After watching two install videos online, I had this installed in about an hour by myself. I took the rear tires off to gain access to the 4 fender screws. Very good hitch and is typical with Curt products.
Good instruction and easy to install.
so fast and clear
It was a great delivery with a lot of details, awesome!
Great product and services!
Excellent service
Great hitch, very sturdy and well attached! Relatively easy install with two people -- doing solo might be possible but not advisable.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Tyrone
11/29/2023
I use it to carry things on my cargo tray also for light towing including my Goldwing motorcycle! A hitch is holding up as expected no problems at all and didnt even have to tighten it up yet!