Replacement Fabric Options For A Dometic Weaterpro Power Awning

Question

Question:

i need new fabric / material for my awning for my horse trailer. I have a weather pro power awning product # 958303325 model # 805EH21.000B ss# 51470785 Can you get this ?

asked by: Mark D

0

Expert Reply:

Your Weatherpro awning is made by Dometic, but the Solera fabrics that we offer would still be compatible. Based on the code I believe you have a 21' awning. I would doublecheck this by measuring from the center of one arm to the center of the other arm just to be sure. You would not measure the fabric and everything is based on the arm to arm measurement and going off anything else would give you an incorrect size. If you find you have a different size awning then let me know and I can find the appropriate sized fabrics. We carry the following colors for a 21' awning:

Solid Black # LCV000334448
Sand Fade w/ White Weatherstrip # LCV000334447
White Fade # LCV000334445
Black Fade # LCV000334444
Silver Fade # LCV000334452
Sand Fade w/ Black Weatherstrip # LCV000334446
Burgundy Fade # LCV000334449
Blue Fade # LCV000334450
Green Fade # LCV000345105

expert reply by: Kevin C

0

Answer 1

Yes the Solera replacement awning fabric part #LCV000334420 would fit your Dometic setup that you currently have that has the alumaguard.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

The Lippert 2420801 hub is an 8k hub with an 8 lug bolt pattern so for a replacement you'd just need the part #8-285-10UC3-A.

view full answer...

Answer 4

Sorry Jennifer, I am a bit confused as you were looking at the Replacement U-Clamp Bracket #RM-B141 which mounts with bolts and not U-bolts. This part works with the Split Bushing #RM-205217-10 for the discontinued Roadmaster Front Anti-Sway Bar…

view full answer...

Answer 5

To get power to the controller of your Solera Smart Arm 12V Power RV Awning part #LC759404, you need to tap into an existing circuit, or run a power wire from the battery with an inline fuse holder, and a 15 amp fuse, like part #SWC9538, and part…

view full answer...

Answer 6

Hi Joe, The Blue Ox Base Plate Kit #BX1139 is a confirmed fit for your 2024 Jeep Wrangler Rubicon X per Blue Ox. I don't currently have an installation video on a model with a steel bumper but I did measure from the mounting holes down to the…

view full answer...

Answer 7

The Replacement Single Zone Thermostat for Dometic RV Air Conditioners #DMC79FR is a single zone 3 wire thermostat like the one you are describing. I have attached the wiring diagram for this thermostat and the control box below for your reference.

view full answer...

Answer 8

When installing an awning like the Solera Smart Arm 12V Power RV Awning #LC517486, the arms will be secured to the wall framing. When the awning extends there will be quite a bit of leverage, so it is important to mount the awning to an area where…

view full answer...