Help Wiring Up the Curt Push-To-Test Trailer Breakaway Kit with Built-In Battery Charger
Question:
I just ordered a Breakaway kit from you. Where do I connect the black wire from the Blue/ Black Breakaway unit? Does it go to a ground / black wire? Also, the battery charger red wire, I hooked it up to My 12V positive battery side. But it’s not charging up. My white wire I direct wired it to the trailer frame. Is that Okay? Blue went to the blue line with the breakaway blue And Blue on the trailer hookup. Ok on that too?
asked by: Carol J
Expert Reply:
In regards to the Curt Push-To-Test Trailer Breakaway Kit with Built-In Battery Charger part # C52044, the wires from the breakaway switch are not polarity specific. In other words, it does not matter which wire you attach to which circuit so long as one is attached to the blue wire from the battery box and the other to the brake output circuit between the trailer brakes and trailer connector. The other wires from the battery box are white and red, the white goes to ground and the red wire goes to the trailer battery charge line circuit. Unfortunately, I can't tell you what color wires are what on the trailer as the trailer manufacturer could have used any number of colors. That said, there are some standards which you can see in the help article below.
If the breakaway battery isn't charging, that means you either have the wrong wire hooked up or the circuit is not functioning properly. This is all covered in your copy of the instructions if you need further assistance.
Product Page this Question was Asked From
Curt Push-To-Test Trailer Breakaway Kit with Built-In Battery Charger - Top Load
- Trailer Breakaway Kit
- Kit with Charger
- Top Load
- Single-axle
- Tandem-axle
- Triple-axle
- LED Tester
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Curt Push-To-Test Trailer Breakaway Kit with Built-In Battery Charger - Top Load
- Shop: Hopkins Engager Push-To-Test Trailer Breakaway Kit with Built-In Battery Charger - Top Load
- Shop: Tekonsha Shur-Set III Trailer Breakaway Kit with Built-In Battery Charger - Top Load - Clamp On
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring Junction Box - 7 Color Coded Terminals - ABS
- Shop: Tekonsha 7-Way, RV-Style Tester for Brake Controllers - LED Test Lights
- Shop: Tekonsha Push-To-Test Trailer Breakaway Kit with Built-In Battery Charger - Top Load
- Q&A: Battery Box Dimensions for Curt Push-To-Test Trailer Breakaway Kit
- Shop: Pollak 7-Way to RV Socket LED Circuit Tester - Vehicle End
- Q&A: Does Blue Wire of Bright Way Push-to-Test ICU Trailer Breakaway Kit go to Battery Inside Box
- Q&A: Installation of Breakaway Kit Switch for Electric Trailer Brakes on Gooseneck Trailer
- Q&A: Wiring Connections For Bright Way Push-to-Test ICU Trailer Breakaway Kit # BW94FR
- Q&A: Wiring Diagrams for Installing Bright Way Trailer Breakaway ICU Kit # BW94FR
- Q&A: Troubleshooting 2002 F-250 Towing Horse Trailer with Working Exterior Lights but No Interior Lights
- Q&A: How to Wire Break Away Switch on Hopkins Engager Break Away System
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Search Results: 7 way tester
- Video: Review of Bright Way Trailer Breakaway Kit - Kit with Charger - BW94FR
- Video: Review of Curt Trailer Breakaway Kit - Kit with Charger - C52044
- Video: Tekonsha Trailer Breakaway Kit - Kit with Charger - 2028 Review
- Search Results: break away trailer brake
- Shop: Brake Controller
- Search Results: brake controller
- Video: Choosing the Right Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Video: Choosing the Right Trailer Wiring
- Search Results: trailer brake controller
- Video: Tekonsha Prodigy P3 Trailer Brake Controller Review