What Is The Inner Diameter of the Replacement Roller For Thule Roof Mounted Kayak Carriers?

Question

Question:

I have a Yakima round rack. I think it’s about 1 inch. Will this fit on my round crossbar to make loading my kayak easier?

asked by: Buzz F

1

Helpful Expert Reply:

Since your Yakima Crossbars have 1" thick bars, and the inner diameter of the Replacement Roller # 753-3006 is 1", this will work with your rack just fine.

This part is actually supposed to be a replacement for the Thule Hullavator (TH897XT), Roll (TH884), Rollercoaster (TH877XT) and Set-To-Go (TH878XT) roof-mounted kayak carriers, so if you have any of those kayak carriers this'll work as well.

expert reply by: Bryce D

1

Answer 1

For you older version of the Thule Hullavator 897XT the only way to attach it to the top channel of aero bars is with the part #TH56JV. The #TH24BH is the channel adapter for the current version of the Hullavator part #TH898.

view full answer...

Answer 2

I do have an option for you but the Thule Hullavator Kayak Carrier 897XT won't work with aero crossbars, it's too old and cannot be adapted. Therefore, you can either switch to square bars, the Thule SquareBar Evo Crossbars part #TH712500, or…

view full answer...

Answer 3

Looks like you have the older Thule Hullavator 897 which we do still carry a replacement bar mount assembly for with the part #TH753352403.

view full answer...

Answer 4

In order to install your older Thule Hullavator TH897XT the Thule aero WingBars, you are correct that an M6 x 30 is needed, as well as the nut and a washer. The exact parts are as follows: - Replacement Socket Head Cap Screw - M6 x 30 #TH919063054 -…

view full answer...

Answer 5

The Thule SquareBar Roof Rack for your 2010 Honda CR-V, which consists of #TH712200 for the two 47" SquareBar Crossbars, #TH460R for the Podium Feet, and #THKIT3042 for the Fit Kit has a weight capacity of 165 pounds. I went ahead and pulled up…

view full answer...

Answer 6

Yakima has their JetStream roof rack part numbers #Y00428, #Y64AR, #Y39AR that fit the flush rails of your 2022 Mazda CX-5. This does connect to your roof using the door mounts though but there isn't a different style of rack available.

view full answer...

Answer 7

It sounds like you've got Thule Square bars already, and as long as you've not had any issues carrying 2 Hullavators #TH898 on those bars you can keep using them and you'll just need a set of towers that can be attached to the raised side…

view full answer...

Answer 8

According to the instructions for the Thule #TH897XT Hullavator, the kayak carrier is compatible with Thule square crossbars, Yakima round crossbars or Thule AeroBlade and WingBar crossbars that have the channel running across the top. It won't…

view full answer...

Answer 9

The complete kit for your 2019 Subaru Crosstrek consist of three parts. You want the Thule WingBar Evo Crossbars - Aluminum part #TH711200, the Rapid Podium Feet for Thule Crossbars part #TH460R and the Fit Kit for Thule Podium-Style Roof Rack Feet…

view full answer...

Answer 10

No type of adapter will be necessary to use the Thule Hullavator #TH898 with WingBar Load Bars, as they will fit into the channels of those bars. For your 2011 Audi Q5 you can install the Thule WingBar Crossbars #TH711220 (Black) or #TH711200…

view full answer...

Answer 11

Yes, the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs TH897XT (NLA) can fit on both square-bars, as well as on the Yakima CoreBars, like the Yakima CoreBar Crossbar - Steel - Black - 70" Long #8880655. Attached are a couple…

view full answer...

Answer 12

I'm not quite sure what you're asking, but let me see if I can clear some things up for you. The Thule Hullavator Pro Kayak Roof Rack and Lift Assist w/ Tie-Downs #TH898 is compatible with both the Inno Crossbars #INB137 you were looking at…

view full answer...