Is There Replacement Hardware for a B&W Turnover Ball Gooseneck Hitch GNRK1313 2012 Ram 2500

Question

Question:

I’m looking for a hardware kit for a bw turnover ball model 1313. I’m looking for all the bolts and u bolts etc.

asked by: Cody M

0

Expert Reply:

The B&W Turnoverball Gooseneck Custom Installation Kit # BWGNRM1313 contains the mounting hardware and brackets for the Hitch # BWGNRK1313. It does not contain the Center Section # BWGNRC900 or Safety Chain U-Bolts # BW1900-2-1600. This is the only way we carry the hardware for your hitch.

expert reply by: Bud M

0

Answer 1

I have some great news for you, as I reached out to the manufacturer, B&W, and they told me the 1303 center section is compatible! The older 1303 kit used Center Section #BWGNRC900, which is also the same center section for the newer…

view full answer...

Answer 2

It sounds like you're looking for the B&W Turnoverball Gooseneck Custom Installation Kit for Dodge part #BWGNRM1313 which is a replacement for the B&W Turnoverball Underbed Gooseneck Trailer Hitch part #BWGNRK1313 that fits…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

If your trailer has 7 wires running all the way back to the brakes, then yes, you can tap into the existing wiring. Each of your new brakes will have two wires for the brake magnet. One wire is for 12 volt power to the brake magnets and the other…

view full answer...

Answer 8

Hey Eric, the Curt Multi-Fit Ball Kit w/ 4" Offset for Chevy/Ford/GMC/Nissan Underbed Gooseneck Hitch #C68ZV is not going to work with your Ram, unfortunately. This one is only going to work for select YMM (Year Make Model) Ford 250-450s, GMC…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

For your 2007 Ram 3/4 ton, I'd recommend the Curt #C31017 which would mount to the underside of the frame members and would have the receiver tube sitting directly under the front bumper. I spoke with my contact at Draw-Tite who confirms that…

view full answer...

Answer 11

The one really big downside to gooseneck towing is that there isn't a great solution for short bed truck clearance unlike fifth wheel towing. With fifth wheel hitches you can use a slider hitch and have the clearance issue handled. With gooseneck…

view full answer...

Answer 12

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Is There Replacement Hardware for a B&W Turnover Ball Gooseneck Hitch GNRK1313 2012 Ram 2500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching