Replacement Mounting Hardware For Curt Trailer Hitch Receiver # C12284 on a 2005 Subaru Outback

Question

Question:

Hi, I was wondering if I could just purchase the hardware kit for this hitch? I took it off, and have no idea where I set the hardware for it. Thanks for your help! C12284

asked by: Sarah

0

Expert Reply:

You can order the Replacement Hardware Kit # RHK. This will give you the mounting hardware for the Curt Trailer Hitch Receiver # C12284 by typing the hitch number in the appropriate box on the item page. Then you will be able to reinstall the receiver on your 2005 Subaru Outback.

expert reply by: Bud M

0

Answer 1

You are correct, you will need the Curt Bike Rack Strap with Cambuckle, item #18050, to support all non-trailer loads on any Curt Manufacturing 1-1/4 inch trailer hitch. This strap is attached to the vehicle using the rubber coated hook on the end…

view full answer...

Answer 2

Both of the hitches you mentioned are good quality hitches, are easy to install and require no drilling or welding for installation. They have very similar towing cacities: 4000 lb for the Draw-Tite and 3500 lb for the Curt. I recommend the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 5

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a…

view full answer...

Answer 6

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 7

Congrats on the new car! For your 2024 Subaru Outback, I recommend the etrailer Hitch item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. I really like this hitch because it mounts behind the rear bumper cover…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

For your 2023 Subaru Outback, I recommend the Curt Trailer Hitch item #C69VV. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver. I really like this hitch because it is an easy…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

The 2022 Subaru Outback and Outback Wilderness share the same hitch fits. Although the #DT73RR Draw-Tite Class III hitch is a fit for your vehicle, once installed the entire hitch would be visible from the rear. If that doesn't bother you, this…

view full answer...

Replacement Mounting Hardware For Curt Trailer Hitch Receiver # C12284 on a 2005 Subaru Outback

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching