Are HappiJac Turnbuckles Compatible With TorkLift Frame Mounted Tie Downs For Slide In Campers?

Question

Question:

Do the Happy Jack quick load turn buckles work with the torklift frame mounted tie downs

asked by: Kelly M

0

Expert Reply:

The HappiJac Qwik-Load Turnbuckles # LC182895 have lengths which are designed to work with their bed/bumper mounting points. For TorkLift frame mounted tie downs I recommend using their FastGun Turnbuckles # TLS9529-2-LK as they are all long enough to reach your tie downs.

expert reply by: Bud M

0

Answer 1

Yes, I contacted the manufacturer directly who confirmed the HappiJac Original Turnbuckles for Camper Tie-Downs #LC182898 will fit your 2008 Dodge 2500 pickup with frame mounted tie downs. Included is a video resource with additional information.

view full answer...

Answer 2

Turnbuckles like theHappiJac Original #LC182898 are more or less universal so you'll be able to use them with the TorkLift Custom Frame-Mounted Camper Tie-Downs #TLT2303.

view full answer...

Answer 3

I spoke with HappiJac about the HappiJac Original Turnbuckles for Camper Tie-Downs part #LC182898 and they informed me that the max reach is 22" for the front and 33-1/2" for the rear. Please note, the turnbuckles are adjustable so you can…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 10

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 11

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...