Is The Curt Rota-Flex Pin Box Compatible With The Curt CrossWing 5th Wheel Trailer Hitch  

It is super light! The Curt CrossWing item #C86JR weighs only 87 lbs. This hitch attaches to industry standard rails and has a 20,000 lbs capacity.

Yes, the Curt Crosswing Lightweight 5th Wheel Trailer Hitch #C86JR can be used with your Reese Sidewinder. You will also need the Sidewinder Wedge for Curt CrossWing 5th Wheel Trailer Hitch #C85DR.

The Demco Recon #DM8550043 and Curt CrossWing #C86JR have quite a few differences that separate the two similar designs. The Recon has an extra 1,000lbs of capacity and comes with a 15-1/2", 17-1/4", or 18" height setting.…

If you're referring to the Andersen Ultimate 5th Wheel Hitch Connection you'd actually need to reach out to Andersen directly as we don't carry this. That said, Lippert, the trailer frame manufacturer for most new trailers on the road…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

A wedge is needed, yes, and the Lippert Turning Point pin box does come with a universal wedge, but it is not a very good fit with the B&W Companion #BWRVK3710. So I highly recommend instead using the 5th Airborne Custom Wedge for B&W Fifth…