Measurements of the Double Roller Catches with Prongs for RV Cabinets

Question

Question:

What are the measurements for Double Roller Catches with Prongs for RV Cabinets - Qty 2 Item # 37270235

asked by: Ricardo A

0

Expert Reply:

I have listed the measurements for the Double Roller Catches with Prongs for RV Cabinets # 37270235 below and included a diagram of each with the measurements.

Catch: 1-5/8" tall and 7/8" wide with mounting hole spacing of 1-3/16"

Prongs: 1-11/16" tall and 7/8" wide

expert reply by: Scott S

0

Double Roller Catch with Prongs, Catch measurements
(click to enlarge)

Double Roller Catch with Prongs, Prongs Measurement
(click to enlarge)

Answer 1

The requested measurements for the Double Roller Catches with Prongs for RV Cabinets, #37270235 are 7/8" by 1-11/16".

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

You will have to use a 12V outlet to power the Demco Wireless Coachlink Braking Monitor #SM99945. Since you don't already have one you can add it using the 12 Volt Outlet Kit, 20 amps #RM-9332.

view full answer...

Answer 4

The Roadmaster Stop Light Switch Kit #RM-751490 will get power from a fuse and connect to one of the black wires on the switch. The other black wire can connect to your monitoring system as the power as the switch will only allow power to pass…

view full answer...

Answer 5

Hey Mike as long as your 2018 Primetime Lacrosse has 3 inch diameter axles the Roadmaster Comfort Ride part #RM-2460-2560 is going to fit and work great.

view full answer...

Answer 6

For replacement Blue Ox Base Plate tabs we have the following: Tab Assemblies for Blue Ox Baseplates - Short Front/Short Back - #BLU57XR Tab Assembly for Blue Ox Baseplates - Short Front/Long Back - #BLU37XR Tab Assemblies for Blue Ox Baseplates -…

view full answer...

Answer 7

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 8

A high-low adapter isn't always necessary, but it's needed when your tow bar is outside of the "Safe Zone" which is your towed vehicle base plate brackets being within 3" of level with the center of your motorhome hitch…

view full answer...

Answer 9

Thanks for reaching out, Michael! The Dexter Electric Trailer Brakes #K23-086-087-00 are compatible with 3,500 lb axles and have the standard 4-bolt pattern so if that matches the specs of your axle then this will definitely work for your…

view full answer...

Answer 10

You can back up a trailer with a weight distribution system installed on as long as you don't end up in too tight of a turn. This is especially true with the Curt Weight Distribution System part #C17422 as it has a friction sway control system as…

view full answer...

Measurements of the Double Roller Catches with Prongs for RV Cabinets

Product Page this Question was Asked From

Continue Researching