How to Power Demco Wireless Coachlink Braking Monitor in RV Without 12V Outlet

Question

Question:

Is there other options to power the Coachlink SM99945 monitor other than 12 volt plug? My RV doesnt have the 12 volt power plug. It has HDMI outlets only on the dash.

asked by: Randy C

0

Expert Reply:

You will have to use a 12V outlet to power the Demco Wireless Coachlink Braking Monitor # SM99945. Since you don't already have one you can add it using the 12 Volt Outlet Kit, 20 amps # RM-9332.

expert reply by: Robin H

0

Answer 1

The Roadmaster Stop Light Switch Kit #RM-751490 will get power from a fuse and connect to one of the black wires on the switch. The other black wire can connect to your monitoring system as the power as the switch will only allow power to pass…

view full answer...

Answer 2

It definitely sounds like you have a damaged arm on your Blue Ox tow bar that needs to be replaced. The inner arm may be bent or the mechanism is damaged. Since you've tried everything to make it work your best option is to replace the arm. Since…

view full answer...

Answer 3

You will want to use the Demco SBS Wireless Coachlink #SM99945 with the Demco SBS Stay-IN-Play DUO Supplemental Braking System #SM99251 to receive notifications inside your motorhome. The LED light that comes with the Stay-IN-Play is only for wiring…

view full answer...

Answer 4

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 5

You will have to use a 12V outlet to power the Demco Wireless Coachlink Braking Monitor #SM99945. Since you don't already have one you can add it using the 12 Volt Outlet Kit, 20 amps #RM-9332.

view full answer...

Answer 6

Gladly! The difference between the Blue Ox Patriot 3 Radio Frequency, Portable Braking System BRK2019 and the Blue Ox Patriot Radio Frequency, Portable Braking System #BLU37TR is that the Blue Ox Patriot 3 RBRK2019 is older, no longer available, and…

view full answer...

Answer 7

I've dealt with this issue in the past and Roadmaster stated that there shouldn't be more than 1/8" gap, otherwise you'll get two much play and can start to get friction. Since you're right at 1/8" with the #RM-035-1…

view full answer...

Answer 8

I am sorry to hear that you did not receive the instructions for your Brake Buddy Select 3 Portable Supplemental Braking System #HM39524. But yes, there is an online version of the instructions and I have linked them here for you. The Brake Buddy…

view full answer...

Answer 9

There is one key difference between the Blue Ox Patriot 2 Portable Braking System part BRK2016 and the Blue Ox Patriot 3 Portable Braking System part #BLU37TR. The difference is an extra safety measure built into the Patriot. The Patriot #BLU37TR has…

view full answer...

Answer 10

To flat tow a 2024 GMC Sierra 2500 you will need the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Direct-Connect Base Plate item #e84ZR Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms…

view full answer...

Answer 11

For replacement Blue Ox Base Plate tabs we have the following: Tab Assemblies for Blue Ox Baseplates - Short Front/Short Back - #BLU57XR Tab Assembly for Blue Ox Baseplates - Short Front/Long Back - #BLU37XR Tab Assemblies for Blue Ox Baseplates -…

view full answer...

Answer 12

Hi Robert; hopefully your Roadmaster tow bar is one that attaches to direct-connect base plates as opposed to crossbar base plates; for example the 8,000 lb Roadmaster Sterling would be optimal. Assuming that, here is what you need to flat tow your…

view full answer...