Shelf Bracket For E-Track

Question

Question:

Can we buy separately the 2 track adapters that are attached to the basket and that allow us to install it on the track. 3481738

asked by: Steeve J

1

Helpful Expert Reply:

Those brackets are made for the shelf so not available separately but there are similar brackets for a shelf you may want to consider, the CargoSmart Folding Shelf Brackets for E-Track or X-Track Systems # 3481727.

expert reply by: Kyle S

1

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 3

We have seen people mount storage boxes on either side of the nose of a V-nose trailer like what you see in the picture I attached. The part #DZ91717P would work well if you have room for it like that. The dimensions of the box are 36" long…

view full answer...

Answer 4

The Traffic Cone Holder, #RA-26, that you mentioned is designed to store cones that are 12" - 36" tall, and the arm of the holder is 22-3/8" long. The arm does not fold down a full 90 degrees, so this would not be the best option for…

view full answer...

Answer 5

The best way to power the interior lights in your trailer is with its own independent battery. You will not want to use the breakaway battery. The breakaway battery is only designed to operate the breakaway and will drain extremely quickly,…

view full answer...

Answer 6

The legs for the CargoSmart Folding Workbench Brackets #3481744 will sit 22-21/2" away from the wall when in the deployed position, and then the brackets are 2-1/2" tall so they will stick out that far from the wall. My contact at…

view full answer...

Answer 7

I checked with Erickson and their Removable Motorcycle Wheel Chock item #EM07506 does not have a weight rating. It is made of steel and works with bikes that have up to 6" tires. So long as your Honda and Kawasaki do not have wider tires this…

view full answer...

Answer 8

The Patriot Hitches Adjustable Drop Hitch Receiver Adapter #PH67SR in the 7,000lb capacity is the only capacity we currently carry. For 10,000lbs from Patriot Hitches we have their Captain #PH34FR. We do have the Gen-Y Shank #325-GH-304 rated for…

view full answer...

Answer 9

There may be a solution for you though the Traffic Cone Holder for E-Track or Rack'em Spare Tire Holder #RA-26 does not have a specific weight rating for one of the brackets. There are a couple options for you to consider like the CargoSmart…

view full answer...

Answer 10

For your application I believe these shelf brackets will work but I am sorry we do not have any shelf brackets that are deeper than the 12" one you referenced. The CargoSmart Folding Shelf Brackets for E-Track or X-Track Systems item #3481727 is…

view full answer...

Answer 11

Here are the brake bleeding instructions directly from the manual for the Hydrastar Actuator #HBA16. This process needs to be followed to ensure you do not damage the actuator. BLEEDING AND ADJUSTING THE BRAKES 1. It typically is much easier to bleed…

view full answer...

Answer 12

The CargoSmart Folding Workbench #3481744 will sit approximately 3-3/4 to 4" out from the CargoSmart X-track mount #3481770. The braces on the CargoSmart Folding Workbench are 2-1/2" tall and the bracket that mounts in the X track is sits…

view full answer...

Shelf Bracket For E-Track

Product Page this Question was Asked From

Continue Researching