Where to Attach Ground Wire for Curt T-Connector Wiring Harness Installation on 2019 Honda Odyssey
Question:
Got a vacuum on my 2019 Odyssey EX Opened it up as per the video and couldnt reach the ground. Any suggestions?
asked by: Manish
Helpful Expert Reply:
I'm not sure which of the videos you watched, but there are a few different options for the ground connection on your 2019 Honda Odyssey. If you watch the installation video for the 2022 starting at the 4 minute mark, you can see where Conner uses an M6x1.0 bolt to secure the ground to a factory weld nut next to the fuse box.
If you watch the video for the 2019 starting at 3:30 they pull back the entire side panel and use the factory ground point to attach the wire. If you can find a different screw with a nut running into the frame you can also use that as an attachment point. If you aren't able to access any of these you can use the included self-tapping screw and attach it to the body after drilling a 3/32" pilot hole.
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Trailer Wiring
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2022 Honda Odyssey
- Shop: Roof Rack
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Vehicle Air Mattress
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2019 Honda Odyssey
- Video: Curt Class III Trailer Hitch Installation - 2022 Honda Odyssey
- Video: Tekonsha T-One Vehicle Wiring Harness Installation - 2021 Honda Odyssey
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2018 Honda Odyssey
- Video: Timbren Rear Suspension Enhancement System Installation - 2020 Honda Odyssey
- Video: Best 2021 Honda Odyssey Trailer Hitch Options
- Q&A: Difference Between Tekonsha and Curt Trailer Wiring Harness for 2020 Honda Odyssey
- Q&A: Correct Trailer Wiring Harness for a 2018 Honda Odyssey EX
- Q&A: 2018 Honda Odyssey Trailer Wiring Recommendation
- Q&A: 2020 Honda Odyssey Difference Between Tekonsha 118781 and 118753 Wiring Harnesses
- Q&A: Will the Trailer Hitch for a 2016 Honda Odyssey Fit a 2019 Honda Odyssey
- Search Results: roof rails
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: hitch
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: trailer hitch
- Article: How to Choose the Right Trailer Hitch Class
on Custom Fit Vehicle Wiring
