Weight Distribution Shank For 2-1/2 Inch Hitch Receiver
Question:
Hello, I have a 2014 Ram 2500 and just bought a small camper, 21 tandem axle with a 4855 lb gwvr. I got a wdh with the camper but it doesnt enough and forces the trailer to tow with the tail dragging. Do I really need the wdh with this small of a camper and my truck? Looking at wdhs I would need one with a 8-9 hitch and Im not seeing them.
asked by: Robert
Helpful Expert Reply:
It sounds like the shank you have just doesn't give you enough drop; and whether or not you need a weight distribution hitch is honestly up to you. It should help level your trailer (if you have the appropriate drop), but it may not be a system with sway control, if that's what you were referencing by it not doing enough. One is recommended for staying level, and shanks are essentially universal so you can simply replace the shank with one that has the correct drop. You mentioned 8-9 inches, and I assume your 2014 Ram 2500 has a 2-1/2 inch hitch, so you can use the following:
- Equal-i-zer Weight Distribution Shank - 12" Long - 13" Rise, 9" Drop # EQ94FR
Just measure your current shank's adjustment holes from center to center to ensure they are 1-1/4 inches apart; if they are, you can use the # EQ94FR.
Product Page this Question was Asked From
Equal-i-zer Weight Distribution Shank - 12" Long - 13" Rise, 9" Drop
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- Fits 2-1/2 Inch Hitch
- Equal-i-zer
- Square - 9 Inch Drop
- Square - 12 Inch Rise
- Equal-i-zer
more information >
Continue Researching
- Shop: Equal-i-zer Weight Distribution Shank - 12" Long - 13" Rise, 9" Drop
- Shop: Curt Friction Sway Control for Weight Distribution Systems
- Search Results: sway control only
- Search Results: anti sway
- Video: Review of Equal-i-zer Weight Distribution Parts - Shank for 2-1/2 Inch Hitch - EQ94FR
- Shop: Equal-i-zer Wt Distribution Shank - 12" - 13" Rise, 9" Drop - 600 to 1,400 lbs TW
- Shop: Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 10" Rise/6" Drop
- Shop: Equal-i-zer Weight Distribution Shank - 2-1/2" Hitch - 12" Drop
- Shop: Curt Hitch Receiver Reducer Sleeve - 2-1/2" to 2"
- Shop: Equal-i-zer Weight Distribution Shank - 12" Long - 10" Rise, 6" Drop - 400 lbs TW
- Search Results: equalizer
- Search Results: 2 12 shank
- Search Results: hitch adapter
- Search Results: equilizer
- Search Results: equalizer shank
- Shop: Trailer Hitch
- Article: How to Measure for Trailer Hitch Drop
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: What is the Difference Between the Reese Towpower 7028700 and the Curt Reducer C45405
- Video: Review of Equal-i-zer Weight Distribution Hitch - EQ90-02-4900
- Video: Equal-i-zer Weight Distribution System with 4 Point Sway Control Review
- Video: Equal-i-zer Weight Distribution - WD With Sway Control - EQ37121ET Review
- Q&A: Upgrading a Husky Center Line Weight Distribution System to Higher Tongue Weight and 2.5 inch Hitch
- Shop: Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Choose the Right Trailer Hitch Class
- Video: Choosing the Right Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Choosing the Right Brake Controller
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
on Accessories and Parts
