Replacement Monitor for Furrion Wireless RV Camera System

Question

Question:

I had my Furrion 4.3 inch monitor stolen from my pickup in January. I have been looking at other systems, but would really like to stay a Furrion customer. Is there any chance that I would be able to buy a 4.3 inch, 5, or 7 inch monitor by itself for less money than the whole system? Thank you for your time. Regards

asked by: Anthony L

0

Expert Reply:

Yes, there is a way to purchase a replacement monitor for your Furrion Wireless Camera System. We have three different sizes and I have listed them below.

Replacement 7" Monitor for Furrion Vision S Wireless RV Camera System item # FR47FR

Replacement 5" Monitor for Furrion Vision S Wireless RV Camera System item # FR97FR

Replacement 4.3" Monitor for Furrion Vision S Wireless RV Camera System item # FR77FR

expert reply by: Jerred H

0

Answer 1

Yes, you can upgrade the 4.3 inch monitor of your Furrion setup to the 7 inch #FR47FR or the #FR97FR for the 5 inch. This will work great and give you an easy to view monitor.

view full answer...

Answer 2

Yes, you can use the camera from your 4.3" monitor with the Replacement 7" Monitor for Furrion Vision S Wireless RV Camera System part #FR47FR, just go through the pairing process and you're good to go.

view full answer...

Answer 3

The Replacement 7 inch monitor you'd looked at, part #FR47FR (which is Furrion's part #FOS07TAPK-008 is indeed a correct replacement for your original monitor. According to Furrion, it will be compatible with your existing system, as well as…

view full answer...

Answer 4

The correct windshield mount for the Furrion 7 inch display Vision S is the part #FR79SR.

view full answer...

Answer 5

For the Furrion Vision S side camera/marker light kit #FCE48TASL the brown wire goes to running light circuit for the light to come one, the black goes to ground, and the red is your trigger wire for the camera to turn on. This allows you to decide…

view full answer...

Answer 6

To power the monitor of your Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5" Screen Item #FOS05TASF you can install the Charging Station for RVs - 2 USB Ports - 12V Socket - Black Item #DG61023VP. It has a 12v…

view full answer...

Answer 7

In order to un-pair the camera on your Furrion RV Observation System #FOS05TASF and assign it to the correct designation you will first just need to press the button at the bottom of the camera itself and hold it down for 15 seconds. This will…

view full answer...

Answer 8

The Replacement Furrion Monitor Power Cable #C-FOS07TAPK-006 is used for both the 7" monitor #FR47FR and #FR77FR so you will have no issues reusing the power cord. I included videos of the products mentioned for you to take a look at.

view full answer...

Answer 9

You can upgrade your monitor to the 7 inch version with part #FR47FR. Your power cable can be reused but you'll need a new mount #FR79SR.

view full answer...

Answer 10

The Furrion Replacement 5" Monitor #FR97FR is going to be specific to the Vision S series of cameras. If you have the older Vision or Vision II you will need to upgrade to the Furrion Vision S Wireless RV Observation Camera System #FCE48TASL-05.…

view full answer...

Answer 11

That will really depend on the model of cameras you have. If you have the Furrion Vision S cameras installed then the Replacement 7" Monitor for Furrion Vision S Wireless RV Camera System #FR47FR will work perfectly with them. Keep in mind this…

view full answer...

Answer 12

Your 2017 Ford Transit T250 will have a round connector at the rear of it that the part #HM40975 would connect directly to since your vehicle has the tow package. If it didn't have the tow package, you'd need to start with a 4-way like part…

view full answer...