Does The Wiring On The Electric Trailer Brake Kit Have a Negative/Positive Specific Wire?

Question

Question:

Does it matter which wire is positive or negative after you hook up your brakes up all four of them?

asked by: Robert M

1

Helpful Expert Reply:

The wiring on the Electric Trailer Brake Kit # AKEBRK-35-SA are both the same color as they are not positive/negative specific. So you are able to install either wire to the positive terminal and the other to the negative terminal.

expert reply by: Bud M

1

Answer 1

It sounds like the Bearing Buddy Bearing Protector #BB1968SS is exactly the Bearing Buddy you would need since it is designed for 1.968 in hub bores and your measurement is very close to that. If you wanted to be absolutely sure I would recommend…

view full answer...

Answer 2

Trailer axles typically have the bow you mentioned in them to help compensate for the vertical load they bear and still have proper wheel camber. This way when the load is put on them the axle will flatten out and the wheels will be aligned…

view full answer...

Answer 3

It sounds like you might be searching for some replacement electric trailer braking assemblies or possibly just replacement parts. It's typically not much less cost effective to just replace the entire assembly so that's what I recommend. I…

view full answer...

Answer 4

A 2,000 lb trailer axle like the Dexter Trailer Axle Beam part #T20BTR-7258 is not going to come equipped from the manufacturer with a brake mounting flange because of the weight of the trailer it is designed to be used on. However, most qualified…

view full answer...

Answer 5

Depending on how the trailer was made, there will be a few spots you can check to identify the axle. First, if the trailer was pre-made by a specific company, you may be able to find this information in either the paperwork or on a placard somewhere…

view full answer...

Answer 6

Trailer wheel lug nuts that are 1/2-inch inside diameter typically have a 20-TPI thread pitch (20 threads per inch). Most lug nuts also use a 60-degree-coned profile like #CE11051, but a 90-degree like #STN569 is also available for 9/16-inch studs.…

view full answer...

Answer 7

The difference between a load range E and load range F tire of the same size, 235/85-16, is the weight capacity and pressure. The Karrier Radial Tire, Load Range E, #AM10295, has a capacity of 3,640 pounds at 95 psi. The Load Range F Tire, #AM10501,…

view full answer...

Answer 8

For your Shoreland'r boat trailer you will need the following parts. Self Adjusting Electric Trailer Brake Kit #AKEBRK-35-SA Galvanized Trailer Hub and Drum Assembly #AKHD-545-35-G-K Trailer Wiring 7-Way Upgrade Kit w/ Junction Box #HS381-9000…

view full answer...

Answer 9

To add electric brakes to your 2006 Starcraft pop-up camper, there are a few bits of information you'll need to know. Instead of measuring your axle, you would need to know its weight capacity, as well as the size of your wheels, your mounting…

view full answer...

Answer 10

For the Electric Trailer Brake Kit - Self-Adjusting - 10" item #AKEBRK-35-SA, the brake magnet wires are interchangeable. As long as one goes to power and one goes to ground they will work.

view full answer...

Answer 11

We can definetely help as it looks like you have a standard 4 bolt brake assembly flange 10 inch brake assembly. We have the kit part #AKEBRK-35-SA which comes with left and right hand assemblies for a 3,500 lb axle like what you most likely have.…

view full answer...

Answer 12

You definitely can use the Electric Trailer Brake Kit #AKEBRK-35-SA on your boat trailer if you have an axle rated for 3,500 lbs. In fact, it is becoming more and more common for boat trailers to have electric drum brakes due to how easy they are to…

view full answer...

Does The Wiring On The Electric Trailer Brake Kit Have a Negative/Positive Specific Wire?

Product Page this Question was Asked From

Continue Researching