Recommended Biker Bar for a Harley Davidson Tri-Glide

Question

Question:

Is there any reason that the Biker Bar can not be used with a Harley Tri-Glide? Thank you for your help.

asked by: Thomas F

1

Helpful Expert Reply:

I have spoken with B&W about this question before and they have confirmed that the B&W Biker Bar item # BWMC2301 will indeed work with a Harley Tri-Glide.

I have linked an installation video below.

expert reply by: Jerred H

1

Answer 1

In order to find if the B&W Biker Bar Motorcycle Tie-Down System #BWMC2301 will fit your 2021 Harley Davidson Tri Glide you will need to measure. You will be able to use this system as long as your frame tube diameter is 1-1/8" - 1-1/4"…

view full answer...

Answer 2

First of all that's a pretty sweet looking bike! Secondly, while there are no B&W Biker Bar systems specifically designed for your Indian Chieftain, you still might be able to utilize the Tie-Down System #BWMC2301. I've attached a photo…

view full answer...

Answer 3

We've checked with B and W before and they have told us that for the Harley Tri Glide the correct Biker Bar is the part #BWMC2301.

view full answer...

Answer 4

The B&W Biker Bar Motorcycle Tie-Down System #BWMC2301 is a fit for Harley-Davidson Touring such as your 2016 Road Glide so long as it has a frame tube diameter of between 1-1/8 inches and 1-1/4 inches with a frame width of between 10 inches and…

view full answer...

Answer 5

B and W has told us in the past that the Biker Bar part #BWMC2301 does fit the Tri-Glide that you have. It would attach to the lower frame rails like it did on your Ultra.

view full answer...

Answer 6

A single spare tire mounted in your trailer will not have too much effect on tongue weight but if your application means installing multiple E-Track spare tire holders #RA-16HST then you will want to try to distribute the load evenly if possible. For…

view full answer...

Answer 7

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 11

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 12

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Recommended Biker Bar for a Harley Davidson Tri-Glide

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching