B and W Biker Bar for 2021 Harley Davidson Tri Glide

Question

Question:

What biker bar will work with my 2021 Harley Davidson Tri Glide??

asked by: BILL W

1

Helpful Expert Reply:

We've checked with B and W before and they have told us that for the Harley Tri Glide the correct Biker Bar is the part # BWMC2301.

expert reply by: Jameson C

1

Answer 1

There are a few things that could cause the issue you are having with the locking jaw not opening up fully on the Reese Select Plus 5th Wheel Trailer Hitch part #RP30081. The first thing I would check is that the jaw is greased properly and there is…

view full answer...

Answer 2

I have a solution for you, but there is not an adapter that will allow you to mount the B&W Biker Bar #BWMC2301 to an e-track setup on a trailer. The Biker Bar does come with mounting plates/anchors that are mounted on the underside of your…

view full answer...

Answer 3

Yes, it does. The B&W Biker Bar Motorcycle Tie-Down System item #BWMC2301 will work with your Harley Tri Glide. B&W has confirmed this information with us.

view full answer...

Answer 4

In order to find if the B&W Biker Bar Motorcycle Tie-Down System #BWMC2301 will fit your 2021 Harley Davidson Tri Glide you will need to measure. You will be able to use this system as long as your frame tube diameter is 1-1/8" - 1-1/4"…

view full answer...

Answer 5

I have spoken with B&W about this question before and they have confirmed that the B&W Biker Bar item #BWMC2301 will indeed work with a Harley Tri-Glide. I have linked an installation video below.

view full answer...

Answer 6

Yes, the B&W Biker Bar Motorcycle Tie-Down System #BWMC2301 is the correct system for both your 2016 Ultra Limited(FLHTK) and 2021 Road Glide Special(FLTRXS). It fits all FL Touring models Harley Davidson motorcycles. Your 2014 CVO…

view full answer...

Answer 7

B and W has told us in the past that the Biker Bar part #BWMC2301 does fit the Tri-Glide that you have. It would attach to the lower frame rails like it did on your Ultra.

view full answer...

Answer 8

Your best option is to drop the psi of the air bag from the Flex Air part #LC328492 down to 45 psi and let it be a little high on the marker. Being 1/8 of an inch off wouldn't be an issue but underinflating the bag could cause it to damage…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 11

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 12

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

B and W Biker Bar for 2021 Harley Davidson Tri Glide

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching