Availability of B&W Biker Bar Motorcycle Tie-Down System for 2021 Harley Davidson Tri Glide

Question

Question:

Biker bar for 2021 Harley tri glide?

asked by: Craig

0

Expert Reply:

In order to find if the B&W Biker Bar Motorcycle Tie-Down System # BWMC2301 will fit your 2021 Harley Davidson Tri Glide you will need to measure. You will be able to use this system as long as your frame tube diameter is 1-1/8" - 1-1/4" and your frame width is 10" - 14-1/2".

expert reply by: Robin H

0

Answer 1

I have spoken with B&W about this question before and they have confirmed that the B&W Biker Bar item #BWMC2301 will indeed work with a Harley Tri-Glide. I have linked an installation video below.

view full answer...

Answer 2

We've checked with B and W before and they have told us that for the Harley Tri Glide the correct Biker Bar is the part #BWMC2301.

view full answer...

Answer 3

B and W has told us in the past that the Biker Bar part #BWMC2301 does fit the Tri-Glide that you have. It would attach to the lower frame rails like it did on your Ultra.

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 7

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 10

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 11

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 12

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...

Availability of B&W Biker Bar Motorcycle Tie-Down System for 2021 Harley Davidson Tri Glide

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching