Is the Tandem Axle Teardrop Trailer Fender Offered with Step in Front or Rear
Question:
I am looking to replace fenders on a McClain ATT-2452 trailer. Last week I was recommended the Tandem Axle Tear Trailer Fenders - Rounded Edges - Steel - 14inch to 15inch Wheels - Qty 2 Item # HP94VR. It says that this fender does not come with a step, but I would really like to have steps on the front and back of the fender. Would I be able to purchase steps separately and attach them to the trailer along with this fender? If so what steps do you recommend? Or is there a heavy duty fender that you recommend that comes with a step?
asked by: Kaleb R
Expert Reply:
The Tandem Axle Teardrop Trailer Fenders part # HP94VR don't have built-in step at the front or rear that is correct. If you're looking for a step here, I recommend simply adding a frame mounted step like the HitchMate Boat Trailer Step part # HE4036 or CE Smith Galvanized Steel Step part # CE26212G-15284GA. These are both very cost effective options and easy to install. They also won't damage the fender if anything happens either. The best part of all is that you can position them exactly where you need them for the best access in and out of the boat.
Products Referenced in This Question
CE Smith Galvanized Steel Step for 2" Trailer Frame - 15-1/4" Long x 3" Wide
- Boat Trailer Parts
- Steps
- 3 Inch Wide
- 15-1/4 Inch Long
- CE Smith
more information >
HitchMate Boat Trailer Step - 5" Wide x 9" Long - 400 lbs
- Boat Trailer Parts
- Steps
- 5 Inch Wide
- 9 Inch Long
- Heininger Holdings
more information >
Product Page this Question was Asked From
Tandem Axle Teardrop Trailer Fenders - Rounded Edges - Steel - 14" to 15" Wheels - Qty 2
- Trailer Fenders
- No Step
- 14 Inch Wheels
- 15 Inch Wheels
- 9 Inch Wide
- 65 Inch Long
- Steel
- Bolt-On
- Weld-On
- For Tandem-Axle Trailers
- etrailer
more information >
Continue Researching
- Shop: Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K
- Shop: Dexter Premier Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Timbren Axle-Less Trailer Suspension w Idler Hubs - Standard Duty - 4" Drop - 5 on 4-1/2 - 3.5K
- Shop: Tandem Axle Teardrop Trailer Fenders - Rounded Edges - Steel - 14" to 15" Wheels - Qty 2
- Shop: Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 4 Bolt Flange - 3,500 lbs
- Search Results: torsion axel for trailer
- Search Results: torsion axel trailer
- Q&A: Tandem Axle Spacing for Tandem Axle Trailer Fender Compatibility
- Q&A: Recommended Replacement Fenders for McClain ATT-2452 Trailer
- Q&A: Which Trailer Axle Company is Best, Lippert Dexter or Al Ko
- Search Results: trailer lights
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Search Results: bearing buddy
- Q&A: Replacement Drum Brake Actuator for a 1995 4 Winns Model 3916 Trailer
- Article: Most Popular Wheel Bearings
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Video: etrailer Electric Trailer Brake Kit Installation
- Shop: Brake Controller
- Search Results: lug nut
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Suspension Enhancement
- Search Results: 25580
- Article: Trailer Tire Sizing
- Article: How to Accurately Measure Trailer Leaf Springs
on Trailer Fenders
