Is the Spindle Attached to the Assembly on the Timbren Axle-Less Trailer Suspension System
Question:
does the spindle come assembled to the axle? thx.
asked by: Kevin H
Expert Reply:
For the Timbren Axle-Less Trailer Suspension System with Hubs # A12RS440 that you referenced, the spindle is assembled to the backing plate, and you do not have to do any welding. I have checked with my contacts at Timbren, and you will have to install the backing plate on the control arm of your assembly, but this is a bolt on application.
Please note that you will need to properly pack the bearings with grease before installing them on the spindle. This is an EZ Lube Spindle, but you want to make sure that the bearings are properly packed before filling the remainder of the spindle with grease. It is recommended to use a hand grease gun for this application, it is not recommend to use a pneumatic grease gun because it may exert too much pressure.
I have included two videos that might help you out for packing and greasing your bearings, and an informational article for your reference.
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 4 on 4 - 1,200 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 1200 lbs
- 4 on 4 Inch
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Continue Researching
- Q&A: Comparing 15" Lynx Aluminum Wheel Vs. Steel Wheels for Trailer Trailer
- Q&A: Recommendations for ATV Search & Rescue Carrier
- Q&A: How Much Distance Should I Have Between The Tire And The Trailer Frame?
- Search Results: timbren
- Q&A: Can Timbren Heavy-Duty Axle-Less Trailer Suspension Install on Harbor Freight Trailer
- Q&A: Recommended Timbren Axle-Less Trailer Suspension System for Harbor Freight Trailer
- Q&A: Recommended 1,200lb Timbren Axle-Less Suspension For A Small Trailer
- Q&A: Timbren Axle Less System Recommendation with a 5 on 5 inch Bolt Pattern Hub
- Shop: Lippert Spare Tire Winch with Offset Cable
- Shop: Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 4 on 4 - 1,200 lbs
- Shop: Ultra-Fab Folding Spare Tire Mount for Trailers and RVs - Bumper Mount
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle - 4" Lift - 5 Bolt - 3.5K
- Shop: Karrier ST225/75R15 Radial Trailer Tire with 15" White Wheel - 6 on 5-1/2 - Load Range D
- Shop: Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 5 - Pre-Greased
- Video: Kenda Tires and Wheels - Tire with Wheel - AM32424 Review
- Search Results: jacks
- Search Results: dexter torsion axle
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Trailer Hitch
- Article: Trailer Tire Sizing
- Search Results: 25580
- Article: Trailer Wiring Diagrams
- Search Results: safety chains
- Shop: Trailer Wiring
- Shop: Brake Controller
- Search Results: fender
- Article: Most Popular Wheel Bearings
- Video: Timbren Axle-Less Trailer Suspension System Test Course
- Search Results: leaf spring