Weight of Vesper Steel Modular Trailer Wheel - 16" x 6" - 8 on 6-1/2 - Black

Question

Question:

Im replacing an aluminum rim with this rim. The aluminum rim weighs 21.3lbs What is the weight of this rim?

asked by: Jim K

1

Helpful Expert Reply:

The Vesper Steel Modular Trailer Wheel part # TA77RR weighs around 30 lbs.

expert reply by: Conner L

1

Answer 1

We can get you pretty close to what you are looking for, but for a 16 inch tire, the highest load capacity is the Provider ST235/85R16 Radial Trailer Tire - Load Range G #TTWPRG235R16 which has a 4,400 lb capacity (per tire) when inflated to its max…

view full answer...

Answer 2

The highest-rated 16-inch trailer tire we offer is the Load Range G Provider ST235/85R16 Radial Trailer Tire #TTWPRG235R16. This tire's maximum load capacity is a whopping 4400-lbs at 110-psi cold tire pressure when used in a single-tire…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 5

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 6

Your math is correct in your trailer weight load example. If a fully-loaded tandem axle trailer weighs 4000-lbs then each of the 4 tires will bear 1/4th of that load, or 1000-lbs. In this case a tire rated for 1300-lbs would provide a good safety…

view full answer...

Answer 7

The 12 inch tires that we carry are rated for 65 miles per hour. Any faster than that for extended periods and the excessive heat build up will cause tire failure. To get a tire with a higher speed rating you would have to go up in size. That also…

view full answer...

Answer 8

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 9

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 10

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 11

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 12

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Weight of Vesper Steel Modular Trailer Wheel - 16" x 6" - 8 on 6-1/2 - Black

Product Page this Question was Asked From

Continue Researching