bing tracking image
Q & A Icon

Recommended Flat Towing Set Up for a 2019 Jeep Cherokee Trailhawk Pulled by a Tiffin Breeze  

Question:

You’ve been very helpful so far, finally arrived at a configuration I’ll need help with again, thanks for bearing with me. I have a 2019 Jeep Cherokee Trailhawk, will be flat towing behind a 2020 Tiffin Breeze which has air brakes. I would like a permanent install brake assist, and some nearly invisible front connectors. Can you steer me towards a complete setup? Thanks again for all your help.

0

Expert Reply:

Happy to help! I have listed the parts you will need below to flat tow your 2019 Jeep Cherokee Trailhawk, along with any installation videos we may have. There is a specially designed permanent installation supplemental braking system that will work great with your 2020 Tiffin Breeze's air brakes.

Tow Bar and Safety Chains - Roadmaster Falcon 2 Tow Bar item # RM-520 and item # RM-643

Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Fixed Arms item # RM-521451-5

Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267

Supplemental Braking System - Demco Air Force One Supplemental Braking System for Tiffin Chassis Motorhomes w Factory Air Brakes item # DM55MV

High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. I have linked a FAQ article that explains all this in more detail along with our selection of adapters.

expert reply by:
0
Jerred H

Products Referenced in This Question





Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>