Will the Trailer Valet RVR5 Remote-Controlled Trailer Dolly Work with a CruiseMaster Coupler

Question

Question:

Hey there, trying to find out if the trailer valet rvr5 is compatible with the cruise master hitch. Thank you

asked by: Andrew

0

Expert Reply:

The Trailer Valet RVR5 Remote-Controlled Trailer Dolly part # TVRVR5 is compatible with any trailer coupler which uses a 2" or 2-5/16" hitch ball. I looked up the CruiseMaster and this does not use a standard hitch ball design therefore would not be compatible. That said, there is a version of this dolly that may work better for you in the
Trailer Valet RVR3 Remote-Controlled Trailer Dolly part # TVRVR3 since it attaches to the frame so that's what I recommend.

expert reply by: Conner L

0

Answer 1

Since the Cruisemaster DO35 requires a ball mount platform with a 1 inch diameter ball hole you'd need an adjustable ball mount that uses a traditional style of ball mount platform like the Convert-a-Ball Adjustable-Height Ball Mount #TK5007…

view full answer...

Answer 2

Yes both of the Trailer Valet Remote-Controlled Trailer Dollies #TVRVR5 and #TVRVR3 have internal brakes that are automatic. What this means is that unless you are intentionally moving them they will not move or roll. The 5 is just as ball mount…

view full answer...

Answer 3

You will want to keep the hitch height on your 2021 Jeep Gladiator within 3 inches of the coupler height of your OPUS OP2 trailer. The Gen-Y Glyder Shock Absorbing Ball Mount for 2" Hitches item #325-GH-12005 will provide you with up to 6"…

view full answer...

Answer 4

The reason some ball mounts have different lengths is simply to allow for more clearance between the tow vehicle and trailer. Some people like a longer ball mount if, for example, they want to be able to open the tailgate of their truck when the…

view full answer...

Answer 5

When the shank of a ball mount or hitch-mount accessory - say a bike rack for example - is solid rather than hollow this typically means it will be stronger. It also means it will be heavier. The Brophy Ball Mount #BH20 has a solid steel shank which…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

view full answer...

Answer 9

Yes, a trailer that is nose up can cause big problems. A level trailer is ideal and worth working toward for safety. The good news is that you can get the trailer almost exactly level with switching ball mounts. This is where an adjustable ball mount…

view full answer...

Answer 10

The ideal height will actually have to do with how tall the coupler of the trailer is from the ground. The Draw-Tite #76020 will sit at 13 1/2 inches from the ground to the top of the hitch when installed on a 2016 Mazda CX-9. From what I could find…

view full answer...

Answer 11

If the trailer is less than 1 inch off of being perfectly level either up or down then it will be perfectly fine. Having it slightly higher would be better because presumably the tongue weight of the trailer will pull it down a little. You could also…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Will the Trailer Valet RVR5 Remote-Controlled Trailer Dolly Work with a CruiseMaster Coupler

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching