How to Install Curt T-Connector on 2018 Hyundai Ioniq Hybrid Blue

Question

Question:

Do you have a link for the harness installation on a Hyundai 2018 Ionic Blue I see a bunch for other vehicles I also read the instructions but seeing a video would be better Thanks

asked by: Michael B

0

Expert Reply:

Thanks for reaching out!

To install the Curt T-Connector Vehicle Wiring Harness # C56233 on your 2018 Hyundai Ioniq Hybrid Blue you'll need to use the instructions because as of right now (February 2023) we haven't had the chance to install this on the Blue model.

The instructions are linked to this answer page as well as a photo of the steps needed to take for you to reference.

expert reply by: Jon G

0

Installation Instructions for Curt T-Connector for 2018 Hyundai Ioniq Hybrid Blue
(click to enlarge)

Answer 1

We've confirmed that the Curt trailer harness, part #C56233, is a fit on the 2013 Hyundai Elantra GT. It plugs into the car's wiring behind both tail lights. Then there is a wire that needs to be run to the vehicle battery through an included…

view full answer...

Answer 2

The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56381 requires power directly from the battery. You will need to run that power wire away from hot or moving parts up to your vehicle battery. To do so, there are 3…

view full answer...

Answer 3

I reached out to my contact at Curt and for your 2017 Hyundai Ioniq using wiring harness #C56381, you will connect that 12V power wire for the harness to the lithium ion starter battery under the back seat on driver's side. It is a little…

view full answer...

Answer 4

I really wish we did, but we do not have any adjustable ball mounts that fit a 1-1/4 inch hitch like the #MT70068 that you referenced. The added length and leverage of the adjustable ball mounts is why they aren't made for the lighter duty 1-1/4…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

How to Install Curt T-Connector on 2018 Hyundai Ioniq Hybrid Blue

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching