Do Global Link Replacement Rollers For Slide Out Have Weight Rating

Question

Question:

WHAT ARE THE LOAD RATINGS OF GLOBAL LINK 295-000182 AND 295-000180????

asked by: Leonard S

0

Expert Reply:

There are not specific weight capacities for either the Global Link Replacement Roller for RV Slide Out - Surface Mount # 295-000180 or Side Mount # 295-000182.

expert reply by: Kyle S

0

Answer 1

This side mount roller's wheel is 1" lower than the mounting flange. I have attached a dimensioned picture.

view full answer...

Answer 2

Yes, you can use a roller for RV slide outs like the Global Link Replacement Roller for RV Slide Out #295-000180, even if your slide out does not currently have them. I would recommend that you verify that you have the appropriate spacing available…

view full answer...

Answer 3

Feel free to email me back with the pictures you have but in general just a single roller like the #295-000180 would be all that you'd need to level the one corner that is lower. I would recommend checking to make sure the tracks of your slide…

view full answer...

Answer 4

The Lippert Components Roller Bearing, #LC118353, is designed to fit Lippert above floor slide-outs. Unfortunately, we do not have ability to pull OEM build sheets to identify what part numbers are used. The length of bolt on the #LC118353 roller…

view full answer...

Answer 5

The rollers like the #295-000180 do carry the contents of the slide out. If the slide out is a bedroom slide out then yes the roller will carry the weight of that.

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 8

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 11

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Do Global Link Replacement Rollers For Slide Out Have Weight Rating

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching