Trailer Tire and Wheel with 5 on 5-1/2 inch Bolt Pattern and 4 inch Pilot Diameter

Question

Question:

Do you have trailer rims and tires 5 on 5.5 inch bolt pattern with a pilot diameter of at least 4 inches? Thank you.

asked by: Eric E

0

Expert Reply:

We have the Kenda Loadstar 205/65-10 Bias Trailer Tire w/ 10" Solid Center Wheel # AM3H454 which is a 205/65-10 trailer wheel and tire with a 5 on 5-1/2 inch bolt pattern that has a 4 inch pilot diameter like you need.

expert reply by: Jameson C

0

Answer 1

The Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel part #AM3H440 has a maximum speed rating of 65 mph. In order to obtain a higher speed rating you will need to upgrade to a substantially larger tire size like the Karrier…

view full answer...

Answer 2

We have the part #AM3H454 which matches the criteria you mentioned. It is a 20.5 x 8 - 10 tire Load Range E mounted on a wheel with a 5 on 5 inch bolt pattern.

view full answer...

Answer 3

The 205/65-10 size tire of part #AM3H454 is the metric sizing for a 20.5x8.0-10 size tire. Since you have a 5 on 5-1/2 bolt pattern this tire and wheel combo is exactly what you need. The alternative is to replace your hubs with a more common bolt…

view full answer...

Answer 4

The 205/50-10 is the modern replacement size for the 20.5x8-10 tire. The #AM3H454 wheel/tire combo you specified has a 1650 lb per tire capacity. My research indicates that the 20.5x8-10 Load Range F tire had a 1765 lb per tire capacity which is…

view full answer...

Answer 5

The speed rating of the Kenda Loadstar 205/65-10 Bias Trailer Tire with 10" Solid Center Wheel #AM3H454 you were looking at is 87 mph. This tire and wheel combo has a 5 on 5-1/2 lug pattern and a maximum load capacity of 1,650 lbs at 90 psi.

view full answer...

Answer 6

On any trailer tire, including one similar to yours such as the 205/65-10 load range E Loadstar #AM1HP56, you always want to inflate the tire to the maximum psi, which on this tire is 90. Doing this will give you the best performance, allowing the…

view full answer...

Answer 7

Your current tire size of 4.80-12 is 20.5 inches tall and the size you mentioned is much shorter so your best option would be the tire size 205/65-10 which is exact same height but much wider like with the part #AM3H454 for a 5 lug wheel or part…

view full answer...

Answer 8

The 205/65-10 is the closest match to a 20.5x8-10 tire size. The 205 will be 20-1/2 inches tall and 8.3 inches wide. There are different load ranges for the tire and different bolt patters of the wheels for a total of 20 options, see link to the…

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 12

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...