Availability of Inner Member of Dexter Surge Disc Brake Actuator 7,500 lb Tandem Axle

Question

Question:

Regarding the DX56FR: is the inner member model 34044? That is, a 7500# rated, two-axle, disc brake inner member? Thanks.

asked by: Bill B

0

Expert Reply:

We have the inner member for the Dexter Brake Actuator part # DX56FR with the # DX99FR which is what you are looking for. This is a 7,500 lb rated disc brake inner member that is compatible with tandem axle setups.

expert reply by: Jameson C

0

Answer 1

The Dexter DX7.5L A-60 Brake Actuator w Electric Lockout #DX56FR is designed to mount on a 3" x 5" straight tongue. In order to make this work for your trailer, you would need to use a flexible brake line since the actuator and line will be…

view full answer...

Answer 2

The Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K #DX56FR you were looking at is confirmed to work with tandem axle trailers like yours, and is a great option as long as your trailer uses disc…

view full answer...

Answer 3

The Replacement Inner Member for Dexter DX7.5L Actuator part #DX99FR is designed for UFP Model A-60 Actuators. I can't look up what actuator any one particular trailer uses but if you can get me the the model number of the existing actuator found…

view full answer...

Answer 4

The Dexter DX7.5L A-60 brake actuating coupler, part #DX89FR would be a direct replacement for the Dexter 34044 Disc Brake coupler you mentioned.

view full answer...

Answer 5

The proper replacement inner assembly member for your UFP 34043 would be indeed be the the Dexter #DX99FR which is compatible with disc brakes. The replacement has an electric lock out and has a 7500K capacity and is intended to work with a 2 inch…

view full answer...

Answer 6

The UFP 34044 is basically the Dexter DX7.5L A-60 part #DX89FR. The second number you mentioned is actually a phone number. But the #DX89FR would be an exact replacement for what you have.

view full answer...

Answer 7

When It comes to replacing your A-60, I recommend The Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2 inch Ball - Zinc - 7.5K #DX89FR. It is a bolt-on model, that has a weight capacity of 7,500 pounds. It has the electric…

view full answer...

Answer 8

I have no way of looking up which actuator your boat trailer was equipped with, as the trailer manufacturers don't make that database information public. If your Ranger boat trailer uses the Dexter DX7.5 Disc Brake Actuator, the #DX99FR would be…

view full answer...

Answer 9

The main difference between The Dexter Inner Membrane #DX99FR and The Dexter inner Membrane #DX39FR is that the #DX99FR is for a tandem axle with disc brake setup. The #DX39FR is for a single axle with disc brake setup. Both Dexter membranes have a 2…

view full answer...

Answer 10

I have a replacement for you but we do not carry the Reliable ACT-7.5K Brake Actuator. We have the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout #DX89FR that will replace your surge brake actuator on your trailer. The specs match but the bolt…

view full answer...

Answer 11

The Replacement Master Cylinder Assembly for Dexter Brake Actuators - Disc Brakes #DX44FR can be used to replace the A-60 master cylinder and is designed to fit on a variety of Dexter/UFP brake actuators.

view full answer...

Answer 12

There are a couple options that could be causing this issue with your Replacement Master Cylinder Assembly #DX44FR. The first would be an incorrect fitting. The female brass fitting exiting the solenoid or master cylinder body of the K71-757-00…

view full answer...