Difference Between LC179013 & LG-179013 Landing Gear Legs

Question

Question:

What is the difference between lg179013 and lc179013? Will they either one replace lc119102?

asked by: Johnny M

0

Expert Reply:

The difference is the height; the Lippert Components 32" Lead 5th Wheel RV Landing Gear Drop Leg # LC179013 and Replacement Lead Jack w/ Drop Leg for Stromberg Carlson Landing Gear - 29-1/2" # LG-179013 is the lengths. The Stromberg-Carlson is a big longer overall but has a shorter drop leg.

These have different travel and are replacements for different landing gear than the # LC119102, so if you have Venture landing gear, you'll need the # LC119102.

expert reply by: Kyle S

0

Answer 1

Yes we have confirmed for sure that the #LC119102 is the exact same as the LC241846 and would work for you.

view full answer...

Answer 2

The Lippert Landing Gear Leg model LCI PN241846 on your landing gear system refers to the Lippert Heavy Duty Landing Gear Master Leg #LC241846. For a repair kit that will work nicely with this leg, you can use the Lippert Lead Leg Repair Kit…

view full answer...

Answer 3

It sounds like you're looking for a replacement follow leg for your Venture landing gear. If this is the case, I recommend the Lippert Components Replacement 5th Wheel RV Landing Gear, Follow Leg #LC179014. This follow leg has an out tube…

view full answer...

Answer 4

In order to find the correct replacement landing gear leg for your Open Range 430RLS 5th wheel trailer I would need to know the brand and part number of the landing gear leg you currently have on your trailer. These should be stamped or etched into…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…

view full answer...

Answer 7

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side.…

view full answer...

Answer 8

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 9

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 10

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 11

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 12

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Difference Between LC179013 & LG-179013 Landing Gear Legs

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching