Does Lippert Replacement Landing Gear Leg LC119102 Replace LC241846

Question

Question:

I saw that Eric B. answered a question about a Lippert front landing gear part # LC241846 and said it could be replaced with LC 119102 and just wanted to confirm that is correct before I order 119102, as 241846 is still out of stock. Thanks!

asked by: Dane P

0

Expert Reply:

Yes we have confirmed for sure that the # LC119102 is the exact same as the LC241846 and would work for you.

expert reply by: Jameson C

0

Answer 1

I spoke with my contact at Lippert Components about what the correct replacement bevel gear kit would be for the front landing gear on your 2017 Open Range Roamer 371MBH. He said that the front landing gear for the Ground Control 2.0 actually…

view full answer...

Answer 2

For a system that has a 10,000 lb lift capacity, I recommend the Bulldog Electric 5th Wheel Landing Gear Set, part #BD500161. This landing gear features 36 inches of travel and will bolt right up in place of your Venture landing gear.

view full answer...

Answer 3

The Lippert Landing Gear Leg model LCI PN241846 on your landing gear system refers to the Lippert Heavy Duty Landing Gear Master Leg #LC241846. For a repair kit that will work nicely with this leg, you can use the Lippert Lead Leg Repair Kit…

view full answer...

Answer 4

It sounds like you're looking for a replacement follow leg for your Venture landing gear. If this is the case, I recommend the Lippert Components Replacement 5th Wheel RV Landing Gear, Follow Leg #LC179014. This follow leg has an out tube that…

view full answer...

Answer 5

The difference is the height; the Lippert Components 32" Lead 5th Wheel RV Landing Gear Drop Leg #LC179013 and Replacement Lead Jack w/ Drop Leg for Stromberg Carlson Landing Gear - 29-1/2" #LG-179013 is the lengths. The Stromberg-Carlson…

view full answer...

Answer 6

In order to find the correct replacement landing gear leg for your Open Range 430RLS 5th wheel trailer I would need to know the brand and part number of the landing gear leg you currently have on your trailer. These should be stamped or etched into…

view full answer...

Answer 7

You should need repair kit #LG-146059 for the lead leg and #LG-146060 for the follower leg. From the picture you sent in I was able to determine that you have a Venture landing gear set VMC900R.

view full answer...

Answer 8

For your VMC900R landing gear if you want to replace the lead leg I recommend the Replacement Lead Leg for Stromberg Carlson Landing Gear - 33-1/2" #LG-177202 and then for the follow leg #LG-177201. I've attached a photo of the measurements…

view full answer...

Answer 9

The Lippert replacement leg part #LC119102 that you referenced is the correct replacement for your Venture landing gear VMC900R.

view full answer...

Answer 10

The correct replacement landing gear legs for your 2008 K-Z 5th Wheel Trailer are going to be the Replacement 5th Wheel RV Landing Gear part #LC179014 for the follow leg and the Replacement 5th Wheel RV Landing Gear part #LC179013 for the lead leg.…

view full answer...

Answer 11

I spoke with my contact at Stromberg Carlson who confirmed that the Replacement Lead Leg #LG-177202 will work well as a replacement for your Venture VMC900. Then for the matching follower leg you would want the part #LG-177201.

view full answer...

Answer 12

The internal parts (screw and nut) on your Venture landing gear are not available as replacement parts but we may have a replacement leg. We carry several legs that could potentially work. Lead: #LC119102 (outer tube is 29-1/2 inches overall) Follow:…

view full answer...

Does Lippert Replacement Landing Gear Leg LC119102 Replace LC241846

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching