Will Bauer Products Door Lock Fit a 2006 Dutchmen Express Motorhome

Question

Question:

My 2006 Dutchmen Express 30 Class C motorhome ... side entry door lock striker bolt snapped. I am guessing that Bauer Products Motorhome Door Lock - Black Item # BA64FR might be replacement. Is it possible to confirm? I can send photo of lock in door.

asked by: William J

0

Expert Reply:

The Bauer Products Motorhome Door Lock # BA64FR will fit your door if it's 1-1/4" to 1-1/2" thick and has cutout dimensions of 5-1/4" wide x 4-1/2" tall, so while these are universal door locks, there are some specifications to their fitment.

If this doesn't match what you have feel free to shoot me some photos of the current door lock as well as some dimensions.

Attached is a review video for you to check out!

expert reply by: Jon G

0

Answer 1

The Bauer Products Motorhome Door Lock, #BA64FR, has a pin-to-pin on center measurement of 2-1/2 inches. This is a confirmed replacement for Bauer BP-12RVLP or Trimark 060-0650 standard entry door latch.

view full answer...

Answer 2

The Bauer Products Motorhome Door Lock, #BA64FR fits doors that are 1-1/4" to 1-1/2" thick and requires a cutout dimension of 5-1/4" wide x 4-1/2" tall. Based on the measurements you provided and the attached…

view full answer...

Answer 3

The Bauer Products Motorhome Door Lock - Black Item #BA64FR has a cut out dimension of 5-1/4" wide x 4-1/2" tall. Looking at your pictures it looks like you have a hole with 4-7/8" width x 4-3/4" height dimensions.…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

We may have some potential options for replacing the tack room door lock on your Featherlight trailer. Is the 5" L x 5" H dimension you gave for the door cutout or the lock itself? The best way to find the right replacement lock is to go by…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The Bauer Products Motorhome Door Lock 402-112-000 #BA64FR has 1/4" diameter pins with 1/2" diameter on the ends of the pins. If this was not the pin size you needed please let me know as I did not see any pictures attached.

view full answer...

Answer 8

I have some great replacement RV door latch options. The only one we offer that would come close to fitting such a large cutout is the Bauer Products Camper Door Lock part #BA65FR which fits up to 5-1/4" wide x 4-1/2" tall openings so…

view full answer...

Answer 9

I contacted Trimark in regards to a replacement part for the Trimark 030-0900. 030-0900 is actually a series number not a specific part number. To find the part number you will need to take the interior handle completely off the unit. On the back…

view full answer...

Answer 10

I think I have a solution for you in the Global Link RV Entry Door Locking Latch Kit, #295-000021 for white or, #295-000019 for black. This latch kit measures 3.47" wide x 4.28" tall, fits doors that are 1-1/4" to 1-1/2" thick,…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...