Replacement Brakes and Hub/Drum Assembly for a 2006 RageN Falcon 3405 Toy Hauler
Question:
Hi, I have a 2006 Ragen 3405 Falcon toy hauler. I need new brakes and hubs. Bolt pattern is 6 x 5.5 on 16 wheels. Double axle. Do you sell Dexter brakes and hubs as a combo kit with all new bearings, etc? So I can just remove the old brakes and hubs and install all new? Thanks! It's a large 5th wheel that weighs 10,800 dry with a gvwr of 14,000 lbs. Pic attached. These should be 6k axles?
asked by: David S
Expert Reply:
Thanks for reaching out and the info on your 2006 Rage'N Falcon 3405 Toy Hauler!
Since it has a GVWR of 14,000 lbs this means you likely have 6K axles and can use the 12" Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-458-459 (one kit per axle) along with the Dexter Trailer Hub and Drum Assembly # 8-201-9UC3-EZ(2 per axle).
The hub and drum assembly uses these bearings and grease seal:
Inner bearing: 25580
Outer bearing: 15123
Grease Seal: GS-2125DL (Inner diameter: 2.125" and Outer diameter: 3.376")
If you can confirm these bearing parts and weight capacities with what you have then you'll be good to go! Attached are some review videos for you to check out.
Products Referenced in This Question
Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Dexter Nev-R-Adjust Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 6000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Can Different Brand Trailer Bearings Be Used As Replacements
- Video: Review of Timken Trailer Bearings - Replacement 25580 Trailer Wheel Bearing - TMK44FR
- Q&A: Replacement Bearing Kit For Dexter 6,000 lb Axle
- Video: LubriMatic Tools - Grease and Lubricants - L11390 Review
- Video: Review of ABS Fasteners 1-3/4 Castle Nut Cotter Pin - 165649
- Shop: Electric Trailer Brake Assembly - Self-Adjusting - 12" - Left Hand - 5,200 lbs to 7,000 lbs
- Shop: Grease Seals 10-36 (pair)
- Shop: Electric Trailer Brake Assembly - Self-Adjusting - 12" - Right Hand - 5,200 lbs to 7,000 lbs
- Shop: #42 Spindle for 5,200-lb to 7,000-lb Trailer Axles - 2-1/4" Diameter
- Shop: Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL
- Shop: Timken Replacement Trailer Wheel Bearing - 25580
- Shop: Trailer Spindle Nut 1"
- Video: TruRyde Double Lip Grease Seal Review
- Video: Review of TruRyde Trailer Bearings Races Seals Caps - Seals - GS-2250DL
- Video: etrailer Trailer Brakes AKEBRK-7R-SA Review
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-655-6-K
- Q&A: Grease Seals Needed for a Weekend Warrior Triple Axle Trailer with 6000 Pound Axles
- Q&A: Replacement Grease Seal for 5,200 Pound Dexter Axle With 010-036-00 Grease Seal
- Q&A: Replacement Brake Assemblies for a 2016 Forest River Sierra 357 Trip 5th Wheel
- Q&A: Size of Circuit Breakers to Use To Install 7-Way Trailer Connector on 2012 Chevrolet Equinox
- Article: Trailer Wiring Diagrams
- Shop: Fifth Wheel Hitch
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Shop: Trailer Hitch
- Article: Most Popular Wheel Bearings
- Search Results: 25580
- Search Results: 10~36
- Shop: Trailer Wiring
- Shop: Gooseneck Hitch
- Article: Trailer Tire Sizing