Grease Seal that Fits 3,500 Lippert Trailer Axle

Question

Question:

I am looking for the inner wheel bearing seal for a 3500# lippert axle on my travel trailer. The numbers on the old seal are: GS1719DL TRP. The seal has a 1.72 ID. and the lippert part number is 333960. Do you carry a replacement seal for this axle? Thanks

asked by: Bill

0

Expert Reply:

We do have the exact seal you are lookin for with the part # 58846 which is for the 3,500 lb trailer axle you have and has an inner diameter of 1.719 inch and an outer diameter of 2.565 inch.

expert reply by: Jameson C

0

Answer 1

The etrailer.com Grease Seals #RG06-050 and #58846 that you referenced are essentially identical. As you mentioned both feature the same 1.719 inch inner diameter and 2.565 inch outer diameter and both have the double-lip design that will help it…

view full answer...

Answer 2

For a hub that has the bearing numbers L68149 and L44649 the grease seal you would want is the part #RG06-050.

view full answer...

Answer 3

The part #RG06-050 that you referenced is a double lip seal that has the metal spring that runs around the lip to hold it tight to the spindle.

view full answer...

Answer 4

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 5

From the numbers you provided it sounds like you need replacement grease seals. In my research, the grease seals I found with the GS-1719DL number have a 1.72 inside diameter and 2.565 outside diameter. The replacement double lip grease seals you…

view full answer...

Answer 6

You can verify that the 10-19 grease seal included in Bearing Kit #BK2-100 is the correct one for your spindles by taking two measurements. First you want to measure the rear hub bore where the seal is inserted. The seal's outer diameter needs to…

view full answer...

Answer 7

The ALKO 4,400 lb axles use the same bearing sizes as the standard 3,500 lb alxes. If you want USA made bearings, I recommend the Bearing Kit #TMK52VR. This kit comes with the Timken brand bearings which are all made here in the USA.

view full answer...

Answer 8

Grease seal set #RG06-050 is what you will need. These are double lip seals, just like what you have (the spring indicates that) and the dimensions are all the same including the 1/2 inch width.

view full answer...

Answer 9

I'm sure we have a bearing kit for your trailer, though we don't have any way of knowing or cross-referencing VINs to determine what you need. So in order to find the correct kit you will need to take apart your current hub assembly and look…

view full answer...

Answer 10

The absolute best cushioned equalizer that fits the dimensions you mentioned having would be the MORryde ALLTREK 4000 part #MR89DR as this is only option to provide vertical and horizontal cushioning. This would make a big difference and you'd be…

view full answer...

Answer 11

Hey Dave, what you gave me is enough info to get you replacement bearings. The grease seal 471750 matches the part #TMK48ZR. For a Timken replacement for the L44610 part number you'd need #TMK63VR. Then for a bearing for the L44649 you'd want…

view full answer...

Answer 12

Hey Doug, thanks for reaching out! The MORryde ALLTREK 4000 #MR89DR dimensions can be a bit difficult to explain via text so I've attached an image giving you the dimensions you're asking about!

view full answer...

Grease Seal that Fits 3,500 Lippert Trailer Axle

Product Page this Question was Asked From

Continue Researching