Grease Seal Recommendation for Hub With Bearings L68149 and L44649

Question

Question:

2007 starcraft pop up model 2018 what grease seal is needed for the drum. inner bearing is a L68149 outer bearing is L44649.

asked by: Mike M

0

Expert Reply:

For a hub that has the bearing numbers L68149 and L44649 the grease seal you would want is the part # RG06-050.

expert reply by: Jameson C

0

Answer 1

On grease seals the TB means a low pressure, double lip seal with a spring and the VB means a non-pressure, single lip seal without a spring. The seal you will need for the part #171255TB is the TruRyde Grease Seals-Double Lip, part #RG06-050. This…

view full answer...

Answer 2

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 3

The 171255UC seal has an inner diameter of 1.719" and an outer diameter of 2.565". I was unable to find an oil seal that matches these measurements, but we do have the Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for…

view full answer...

Answer 4

From the numbers you provided it sounds like you need replacement grease seals. In my research, the grease seals I found with the GS-1719DL number have a 1.72 inside diameter and 2.565 outside diameter. The replacement double lip grease seals you…

view full answer...

Answer 5

The seal we offer part #RG06-050 cross references as the same thing as a Transcom part #171255TB. It would be the exact same as what you have/need.

view full answer...

Answer 6

The part #RG06-050 that you referenced is a double lip seal that has the metal spring that runs around the lip to hold it tight to the spindle.

view full answer...

Answer 7

We do have the exact seal you are lookin for with the part #58846 which is for the 3,500 lb trailer axle you have and has an inner diameter of 1.719 inch and an outer diameter of 2.565 inch.

view full answer...

Answer 8

The etrailer.com Grease Seals #RG06-050 and #58846 that you referenced are essentially identical. As you mentioned both feature the same 1.719 inch inner diameter and 2.565 inch outer diameter and both have the double-lip design that will help it to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 11

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 12

Hey Richard, thanks for reaching out! The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 is a great option for a replacement actuator because it's a direct replacement for the common Model 60 actuators that were popular in the '90s.…

view full answer...

Grease Seal Recommendation for Hub With Bearings L68149 and L44649

Product Page this Question was Asked From

Continue Researching