Recommended Weight Distribution Hitch For A 2016 Forest River Flagstaff Hard Side T21DMHW

Question

Question:

I have a flagstaff t21dmhw 2016. Do you have a recommentation on a weight distribution system? It looks like the propane tanks on the 2016 are located in the area most of the weight distribution systme use.

asked by: Richard M

0

Expert Reply:

A 2016 Forest River Flagstaff Hard Side T21DMHW has a GVWR of 3,382lbs so you'd be looking at a tongue weight around 300-400lbs. If you're experiencing some sway while towing your trailer then I recommend the Fastway e2 Weight Distribution w/ 2-Point Sway Control # FA92-00-0450. This system has friction between the spring bars and mounting brackets to help prevent sway.

If you don't experience sway and would like a quieter ride then I recommend the Blue Ox SwayPro Weight Distribution w/ Sway Control # BXW0356. This chain hanger style hitch is easy to install and gives you a much quieter ride since you won't have metal-on-metal contact.

The # FA92-00-0450 requires the frame brackets sit 25"-30" from the center of the trailer coupler and the # BXW0356 requires 29" from the center of the trailer coupler. If the propane tank or any other items mounted on your trailer frame interfere with bracket placement then you'll need to move them. The propane tanks being in the way is a very typical issue. I usually just take them off and unbolt the tank pan from the tongue and move it around to find a location that allows for the brackets to mount.

Before purchasing a weight distribution hitch you'll want to verify in your owner's manual that your vehicle is capable of using a weight distribution hitch.

expert reply by: Kevin C

0

Answer 1

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. Measuring is not required if you just take a look at your coupler and see where it attaches to…

view full answer...

Answer 2

I took a look at the Ram's owners manual and it states if the trailer weighs more than 1,000 lbs loaded, it should have its own brakes. Towing the 3500 lb trailer without braking could lead to accelerated brake lining wear, higher brake…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 6

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…

view full answer...

Answer 10

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 11

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 12

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...