E-Bike Rack Recommendation for 2021 Nucamp Tab 400 for 65 lb Bikes

Question

Question:

How does it attach to the rear of the Tab 400? Not a precise answer to my question.

asked by: David

0

Expert Reply:

For carrying e-bikes at the rear of an RV like your 2021 Nucamp Tab 400 you'll need an e-bike approved for RV use like the Lets Go Aero V-Lectric FAT PRO Bike Rack for 2 Electric Bikes # LGA77FR that you referenced. This rack has a 75 lb per bike capacity and can slide out for easier loading and unloading as well. Most e-bikes are not rated for RV applications due to the rougher ride quality.

expert reply by: Jameson C

0

David

1/23/2023

How does it attach to the rear of the Tab 400? Not a precise answer to my question.

Reply

Jameson C.

1/23/2023

Sorry I mistakenly assumed you had a hitch for some reason. You would need a trailer hitch installed on your Tab which our most universal option is the multi fit frame mounted hitch from Curt # 13703 which fits all frame styles between 22 and 72 inches.

Reply

Answer 1

The Jensen LED RV TV #JE2417 has three ports (SPDIF, AV input, and an audio output for digital audio) for you to plug in your speaker bar, located on the back of the TV.

view full answer...

Answer 2

It looks like most NuCamp Tab 400 trailers are roughly 219" long (18'-3") so the Classic Accessories #CA80200 would be the best available cover for your trailer. This provides good protection from UV rays and weather, plus the zippered…

view full answer...

Answer 3

The Yakima OnRamp Bike Rack for 2 Electric Bikes #Y88DJ you were looking at would actually be perfect. It looks like the Lectric 3.0 tops out at 64 lbs so the rack can handle the weight. It also uses padded clamps to hold it by the frame or seat…

view full answer...

Answer 4

The correct Blue Ox base plate for a 2023 Jeep Cherokee Trailhawk is the part #BX1143.

view full answer...

Answer 5

In most cases, the tailgate on your truck can be left installed and in the down position while coupling to a 5th wheel trailer. Once the trailer is coupled you can then most likely raise the tailgate back up. I say in most cases as there could…

view full answer...

Answer 6

Without knowing how far your hitch sticks out from your Airstream trailer and how wide your handlebars are I can't give you a yes or no answer but I can provide some measurements that will allow you to. From the hitch pin hole to the center of…

view full answer...

Answer 7

The difference between a class II and class III bike rack is the trailer hitch receiver size it fits into. Many bike racks allow for 1-1/4 inch receivers (class I or class II) as well as 2 inch receivers (class III, IV, or V), but some will only fit…

view full answer...

Answer 8

I measured the Swagman E-Spec Bike Rack for 2 Electric Bikes part #S94FR for you and the distance from the center of the hitch pin hole to the center of the first wheel tray is about 16".

view full answer...

Answer 9

I was able to take a measurement of the Curt Bike Rack for 2 Electric Bikes - 2" Hitches - Wheel Mount, part #C89JR. I would feel comfortable carrying bikes with wheelbases up to 50". I have included a video review below.

view full answer...

Answer 10

I reached out to my contacts at Yakima and they advised that the roof racks that come with the 2018 Nucamp Boondock tab 320s travel trailer are Round Cross Bars for Yakima Roof Rack System #Y00409. The Nucamp Boondock trailer model has 58" bars,…

view full answer...

Answer 11

For a great platform bike rack that works with your 2 Lectric XP 2.0 step-thru bikes on your 2011 Forest River 32foot Class C Sunseeker Motorhome, I recommend the Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes - 2" Hitches item…

view full answer...

Answer 12

In most propane appliance situations, there is a regulator located at the tank, followed by a supply line. In that situation, what passes through the hose after the regulator is low pressure gas. Low pressure gas is harmless to rubber. The buddy…

view full answer...