Jack For Changing Tire on Grand Design Reflection

Question

Question:

Can you give me a idea of a jack to use to change tires on my Grand Design Reflection 303 RLS? Also will this work on my 2019 Chevy 2500?

asked by: Gary T

0

Expert Reply:

For changing tires on your Grand Design Reflection use a bottle jack, the Powerbuilt Bottle Jack - 8-1/4" to 16-5/16" Lift - 24,000 lbs # ALL647501.

This can also work on your Chevy, assuming you have a solid place for it to support the truck.

expert reply by: Kyle S

0

Answer 1

You'll need a new center cap. The cap you need will depend on the pilot diameter of the wheel, which is the large hole the center cap fits into. Pull one wheel, and measure the wheel's pilot diameter. A 6 lug wheel like what's shown in…

view full answer...

Answer 2

It sounds like you need to re-calibrate the zero point on your Lippert Ground Control 3.0 #LC304136 system. Below I've listed out the steps you'll need to follow and will allow you to use the auto leveling again. Zero Point Calibration The…

view full answer...

Answer 3

You could go to a slightly larger tire, 235/85-16, and get a higher ply rating which will mean the tire will be stronger. I recommend #TTWPRG235R16 which is a Load Range G rated for 4,400 pounds at 110 psi. It has a ply rating of 14 and an M speed…

view full answer...

Answer 4

Since you are limiting your trailer to 10000lbs, and the average tongue weight is 10-15% of the trailer weight, you are looking at 1000-1500lbs tongue weight. With that said it is a good idea to use a jack with a larger capacity as it will be able to…

view full answer...

Answer 5

Hi there Andy; thanks for that info, and while we don't have 3,500 lb axles that are 86-1/2 inches long, we do have a 5,200 lb option with the Dexter Trailer Axle Beam #8327816. The spring center you mention is an odd one, as the #8327816 has…

view full answer...

Answer 6

Sure thing; the JRV9000R is a double-din stereo so you can replace it with another double din, and for that I recommend the Jensen RV Stereo w/ DVD Player #JWM45. The #JWM45 is a 48 watt stereo that also has the DVD functionality and will fit in the…

view full answer...

Answer 7

The Curt #C56196 2 to 3 wire taillight converter is exactly what you'll need to split out the turn signal function from the brake lamp circuit. However, keep in mind that the #C56196 is NOT compatible with LED lamps, unfortunately we don't…

view full answer...

Answer 8

To replace your JVR9000 I recommend the Jensen RV Stereo - Double DIN - AUX/USB, Bluetooth #JWM40. It has slightly different dimensions that can be easily fixed using a dash plate. This won't have a monitor to watch your video feeds from so…

view full answer...

Answer 9

We do not offer wishbone wiring that has a ground wire going down both sides. You really don't need it because the ground wire is for the plug itself not the lights and you want the ground close to the plug. I recommend using the 4-Way Wishbone…

view full answer...

Answer 10

It sounds like you have a wishbone wiring harness install on your trailer. A regular 4-way wiring harness has 4 wires from the back of the connector, 1 for left turn/brake typically (yellow), 1 for the right turn/brake typically (green), 1 for the…

view full answer...

Answer 11

There is a suggested and common method for 6 function trailer wiring. You will have the following functions: Right Turn, Left Turn, Ground, Tail/marker, Brake, Battery. I have included a help article on trailer wiring that includes a diagram and…

view full answer...

Answer 12

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Jack For Changing Tire on Grand Design Reflection

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching