How To Find Correct Replacement Door Hinges for Horse Trailer

Question

Question:

I need hinges for the back door on my 1998 exiss maximum horse trailer they are broke.

asked by: Coy J

0

Expert Reply:

We do offer replacement door hinges for horse trailers, in order to choose the correct one you'll need to note the type and measure its length. The T-Strap Hinge for Enclosed Trailers part # PLR3408 for example is a t-strap style hinge which measures approximately 9-5/8.

I have attached for you below a full list of our hinge options from various manufactures.

expert reply by: Conner L

0

Answer 1

The hinge you referenced part #PLR2212-AS would replace what you have now on your horse trailer and the holes would line up. It looks like for your window you'd need a piano hinge that's about 2 feet long, but at this time we do not…

view full answer...

Answer 2

I would be happy to help you find the correct replacement door hinge for your 2000 Sooner Royale Horse Trailer, but I was unable to find any dimensions or information about the 03139010 hinge you mentioned. Based on the picture you provided it…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Hi Bruce, To lift your trailer we'll first need to check of the suspension and see if you have torsion axles or a leaf spring suspension. If you have torsion axles then I'll need to see the axle tag in order to determine what you have so I…

view full answer...

Answer 5

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 6

It will indeed work; I just checked with Lippert for you and was able to verify the correct toggle switch for your Lippert Power Stance Electric Trailer Jack #LC69VR (which is the 813748), is the following: - Replacement Extend/Retract Switch for…

view full answer...

Answer 7

The smaller section of the Z-Rail for Enclosed Trailer #362417-955 is approximately 3/4" tall, while the larger section is approximately 1-1/4" tall.

view full answer...

Answer 8

Yes, the H-Channel for Enclosed Trailer #36281-955 can be used for the side door frame on your enclosed trailer. It is specifically designed for building cabinets and doors on a trailer. There is also the 1/16" Thick Tube Trim for Enclosed…

view full answer...

Answer 9

I've checked with Lippert, who tells me that you'd need to measure the length of the actual tube itself, rather than the center arm to center arm length. Given the length you measured, the #LC33FR you'd looked at would be the likely…

view full answer...

Answer 10

The inner diameter of Solera roller tubes like the Replacement 20' Roller Tube for Solera RV Awnings #LC33FR is 3", that being said Solera and other branded awnings are not compatible with each other. We typically have a lot of people…

view full answer...

Answer 11

We do offer a hinge that may work well for you. I recommend part #PLR1904-Z. This is a barn door hinge for dump trucks and is made of 1/4 inch steel. This has a smooth surface that is designed for welding. I have also attached a photo of this hinge…

view full answer...

How To Find Correct Replacement Door Hinges for Horse Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching