Mounting Gasket For Chrome Bezel # B168-10

Question

Question:

Do you have the gasket for the Chrome Base Bracket B168-10?

asked by: Tracy S

0

Expert Reply:

When installing the Chrome Bezel for Peterson Piranha LED Trailer Clearance Lights # B168-10, you will need the Rubber Mounting Gasket # B168-18 for installation. This gasket fits the Peterson 168A and 168R (sold separately).

If you have any further questions please feel free to reach back out to me anytime.

expert reply by: Noah E

0

Answer 1

The correct mounting base for the Peterson clearance light part #168A that you referenced is #B168-18. Or for a chrome base you'd want the part #B168-10.

view full answer...

Answer 2

The Dimensions of the Chrome LED light bracket are: Width 3-15/16 inches Height 1-3/8 inches Mounting holes On Center 1-7/8 inches Square Opening in center of bracket is 7/8 inch wide by 5/8 inch tall These measurements should help you determine if…

view full answer...

Answer 3

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 4

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

I recommend using the Roadmaster wiring for your 2024 Ford Maverick because I've found it to be the most reliable on the market. The correct kit depends on if your Maverick has LED lights or not: - LED Lights #RM38FR - Non-LED Lights #RM-15267…

view full answer...

Answer 8

Hey David, actually what is going to make the biggest improvement in handling and stability for your 2011 Itasca is an upgraded rear sway bar with the part #RM-1139-175. I know that's not what you asked about but for motorhomes where most of the…

view full answer...

Answer 9

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Mounting Gasket For Chrome Bezel # B168-10

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching