Recommended Flat Towing Parts for a 2023 Jeep Wrangler 4xe  

Question:

Expert Reply:

I would be happy to gather a list of parts to help you flat tow your 2023 Jeep Wrangler 4xe. I have listed the ones you will need below and included any installation videos we may have:

Tow Bar and Safety Chains - Roadmaster Falcon 2 Tow Bar item # RM-520 and item # RM-643

Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item # RM-521453-5

Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267. This diode kit allows you to use your Jeep's tail lights and wiring system while preventing feedback from your RV. This kit will come with a 6-way socket for your Jeep as well as an adapter cable to go from the vehicle to the motorhome.

Please note that if your Jeep has ParkSense Proximity Sensors then you will need the Roadmaster Wiring Kit with Smart Diodes for Variable Voltage LED Tail Lights # RM47ZR and the Roadmaster 7-Wire to 6-Wire Flexo-Coil Kit # RM-146-7 instead.

Supplemental Braking System - SMI Stay-IN-Play DUO Supplemental Braking System item # SM99251 or item # SM99243 if your motorhome has air brakes. You will also need the Roadmaster Stop Light Switch Kit item # RM-751490 to ensure that your supplemental braking system is properly positioned and working effectively. This kit activates your RV's monitoring system to alert you when the brakes of your towed car are being applied.

High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. I have linked a FAQ article that explains all this in more detail along with our selection of adapters.

expert reply by: Jerred H

0