Ladder Rack that Can Fit 2022 Ford F-250 with BAKFlip MX4 Tonneau

Question

Question:

I have a 2022 F250 with a 69 bed. using a Bakflip MX4 cover, need a rack to carry my kyack. Is Adarack the only choice?

asked by: Kirby B

0

Expert Reply:

Yes, due to how the BAKflip MX4 # BAK48330 you have on your 2022 Ford F-250 short bed installs the only ladder rack that's going to work is the Adarac Pro Series part # A4000952 which installs through the stake pockets and has vertical uprights that will allow the cover to fold up. Uprights that angle in would interfere with folding panels.

expert reply by: Jameson C

0

Answer 1

For a great ladder rack that fits with your BAKFlip MX4 on your 2021 Silverado 1500 with a 5'8" bed, I recommend the Adarac Pro Series Custom Truck Bed Ladder Rack #A4002965. Since the BAKFlip MX4 completely installs within the bed rails of…

view full answer...

Answer 2

For a ladder rack that is compatible with the BAKFlip MX4 Hard Tonneau Cover - Folding - Aluminum #BAK48100 and can carry a kayak, I recommend the Thule TracRac SR Sliding Truck Bed Ladder Rack #TH43002XT-608. The TracRac SR installs into your 2006…

view full answer...

Answer 3

The Adarac Pro Series Custom Truck Bed Ladder Rack will still work with some overlap on the stake pockets. It doesn't take up the entire pocket and it can sit on the side of the rail slightly, I have not heard of any issues with slight…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Hey Buddy, so the Fastway Adjustable Ball Mount part #DTSTBM6825-2S is a really great choice for the 2-1/2 inch hitch of your 2021 Ford F-250 which is going to be very solid in your hitch due to it's built in anti-rattle device that is easy to…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

I recommend going with the Air Lift LoadLifter 7500 XL Ultimate Air Helper Springs #AL89DQ for hauling around an in-bed camper with your 2024 Ford F-350 Super Duty. I really like this kit because it has the higher 7,500 lb rating (which you don't…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

Yes, the B and W Companion Slider Hitch part #BWRVK3370 does fit the OEM prep kit of a 2021 Ford F-250 Super Duty. Newer trucks do sit up higher but so do the newer fifth wheel trailers to compensate for that so as long as the truck doesn't have…

view full answer...