bing tracking image
Q & A Icon

Can Curt Spectrum Trailer Brake Controller Module Be Mounted to Driver Kick Panel  

Question:

I installed the module vertices on the drivers side kick panel area. Is this acceptable? I ask because it is wildly inconsistent. Its either non reactive or locking thr brakes if I hit a bump while slowly rolling in a parking lot. Thank you,

0

Expert Reply:

In regards to the Curt Spectrum Trailer Brake Controller part # C51170, the instructions simply state to attach the main module to a solid surface such as a dash panel. In other words, the surface must have no movement. An example of a bad spot would be zip tied it to a wiring harness. The driver side kick panel is perfectly acceptable for mounting the module.

If you're having issue with the controller, take a look at the control knob for a flashing light frequency which you can compare to the chart below for a remedy.

expert reply by:
0
Conner L
Can Curt Spectrum Trailer Brake Controller Module Be Mounted to Driver Kick Panel
Can Curt Spectrum Trailer Brake Controller Module Be Mounted to Driver Kick Panel
(click to enlarge)

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>