Trailer Hitch Receiver For a 2022 Chevrolet Silverado 2500 With a Factory Receiver

Question

Question:

The factory hitch has the bumper brackets attached to it. Is there any hitch that comes with the bumper brackets to mount a factory bumper?

asked by: Dennis B

1

Helpful Expert Reply:

The only receiver we have that will fit in place of a factory receiver hitch on your 2022 Chevrolet Silverado 2500 is the TorkLift SuperHitch Magnum Trailer Hitch Receiver # TL74FR.

All the other aftermarket receivers we have will only fit on vehicles without a factory receiver.

expert reply by: Bud M

1

Answer 1

Adding a hitch extender to your setup does reduce the tongue weight and towing capacity by 50% so we would need to find an extender that's rated around the 10,000lb range to be safe. You'll also need to take into account the size of your…

view full answer...

Answer 2

I do have a solution for you. My recommendation is to use the Curt Hitch Receiver Reducer Sleeve - 2-1/2" to 2" #C45405, in combination with the Equal-i-zer Weight Dist Shank - 18" Long - 8" Rise, 4" Drop - 600 to 1,400 lbs…

view full answer...

Answer 3

I have a possible solution, but none of the 14-16" extensions have a high enough capacity. The only thing that comes close is the Gen-Y #GY89SR which has a gross towing weight of 10,000 lbs, but the max tongue weight is only 500 lbs. This would…

view full answer...

Answer 4

The highest towing capacity trailer hitch that fits your 2023 GMC Sierra 3500 with an OEM hitch is the Torklift part #TL74FR which can tow a trailer up to 20,000 lb or if when using a weight distribution system up to 30,000 lb.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

Increasing the tire and wheel size can increase the height of the trailer but it's usually quite minimal. Before you do anything else you should see if the pin box can be adjusted. Although you have to be careful here since This will lower the…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Hi Leslie, What specific dimensions are you needing on the TorkLift SuperHitch Magnum Trailer Hitch Receiver #TL74FR? This hitch is designed for select GMC Sierra's and Chevy Silverado's. You have your vehicle listed as a 2019 Volvo XC90, if…

view full answer...

Answer 11

I reached out to Hydrastar and they are very familiar with disc brakes on your 2018 Grand Design Momentum toy hauler. They said Grand Design typically gets their axles with 9/16" studs of which we only have the Hydrastar Disc Brake Kit w/…

view full answer...

Answer 12

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Trailer Hitch Receiver For a 2022 Chevrolet Silverado 2500 With a Factory Receiver

Product Page this Question was Asked From

Continue Researching