Recommended DeeZee NXc Running Boards w/ Installation Kit for a 2022 Jeep Grand Cherokee WK

Question

Question:

are you sure that dz16202-16241 will fit my 2022 jeep grand cherokee wk?

asked by: Terry F

0

Expert Reply:

Yes, I can confirm that the DeeZee NXc Running Boards w Custom Installation Kit item # DZ16202-16241 do fit the 2022 Jeep Grand Cherokee WK. The WK is just the older model jeep Grand Cherokee which is why these fit. This includes a custom installation kit and everything you need to install these steps.

I have linked an installation video below.

expert reply by: Jerred H

0

Answer 1

I have a great alternative for you. From the installation photos of the DeeZee NXc Running Boards w Custom Installation Kit #DZ16202-16241 for the 2014 Jeep Grand Cherokee, it looks like there is about a 1-1/2 inch gap between the running boards…

view full answer...

Answer 2

The DeeZee step bars part #DZ16202-16241 that you referenced do fit your 2014 Jeep Grand Cherokee Overland. The only versions of your vehicle it does not fit are the ones with the SRT style side skirting and the Overland models do not have that.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

To tow your 2022 Jeep Grand Cherokee behind your motorhome, you're going to first need a base plate kit #RM-521440-5. This will get installed directly onto the vehicle and provide the needed attachment point for a set of tow bars #RM-676.…

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

There is a couple of way to determine which wheel bearings and grease seals you will be needed for a trailer axle. First, checking the numbers on the wheel bearings and seal will allow you to select the correct parts for your axle. However, in some…

view full answer...

Answer 8

It's a plastic cladding that runs along the bottom of the door threshold area basically. If there was a plastic section that ran the distance between the wheel wells below the doors that would be the skirt cladding. There normally is a black…

view full answer...

Answer 9

The OE skirt cladding would be an extra plastic panel that runs along the bottom of the door threshold. It runs front to back between the wheels under the doors. If you don't have this, or are ok with removing it, you can use the #27-6630-1975. I…

view full answer...

Answer 10

You will need the SkyLine Towers for Yakima Crossbars, #Y53TR for a set of 4 or, #8880614 for 1 each.

view full answer...

Answer 11

Since your 2015 Jeep Grand Cherokee Overland has the chrome rails with the slots on its roof it means you have the E Group package. So yes, the Yakima Jetstream roof rack does fit your Jeep. The parts you need are: 50 inch JetStream Crossbars #Y00425…

view full answer...