Factory Style In Bed Trailer Wiring Connection For a 2023 Chevrolet Silverado 2500

Question

Question:

Do you have the wiring to fit in the bed cutout on my 2023 Chevrolet Silverado 2500?

asked by: Robert M

0

Expert Reply:

Yes, the Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness # HM54FR will allow you to install the in bed wiring on your 2023 Chevrolet Silverado 2500. This is the same style as the factory connector and will clip into the factory cutout without modification. The wiring will tee into the factory 7-way on your bumper.

expert reply by: Bud M

0

Answer 1

To add a 7-way connector to the bed of your 2023 Chevy Silverado 2500, I recommend the Curt 5th Wheel/Gooseneck Custom Wiring Harness item #C58FV. This harness puts a 7-way connector in the bed of your truck and allows you to keep the one on your…

view full answer...

Answer 2

All you need to install a B and W gooseneck ball in the bed of your 2020 Chevy Silverado 3500 with the factory rail kit is the part #BWGNXA2061. This fits the center hole for the gooseneck ball and the safety chain loops fit into the pucks to the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

To replace your NOK AD2527E seal you can use #168233. It has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches. Based on what I could find on the NOK AD2527E the inner diameter is the same and the outer diameter is 2.328 inches.…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

Hey Cody, you are installing this B&W Turnoverball #BWGNRK1020 on a 2021 Chevy 2500 correct? If so, the M14 bolts are definitely the correct size. It is possible that the holes in the frame are corroded which is preventing the bolts from…

view full answer...

Answer 11

The "KTC 7600" stamped on the brake pad doesn't look to be a part number, so I can't cross reference it, but we do know you have Kodiak ceramic brake pads. So to determine the correct brake pads, all you need to do is match up…

view full answer...

Answer 12

There is a trailer hitch receiver as well as a 4-way wiring harness that fit your 2022 Jeep Grand Cherokee WL; that said, we don't have any way to reference a VIN so you'll need to confirm if you do have the WL, which is the new model of…

view full answer...