Replacement Lid For Ventline Roof Vent V2094

Question

Question:

my vent line is model v2094 do you have a replacement dome for this model

asked by: Terry G

1

Helpful Expert Reply:

The correct replacement dome lid for V2094 # V2094SP-34 would be part # BVD0449-A03.

expert reply by: Jameson C

1

Answer 1

First thing we gotta do is identify the roof vent lid you need. Which to do that you need to look at the hinge setup of the vent and the shape of the lid. I attached a picture that has a few different common styles. If you can check the picture out…

view full answer...

Answer 2

If the Ventadome roof vent you have on your trailer has four mounting points then the replacement vent cover is part #BVE0108-03. This dome is designed to fit #V3092-601-00, #V3092-603-00, #V3094-601-00, #V3094-601-00C, #V3094-603-00, and…

view full answer...

Answer 3

Since you mentioned that the MaxxAir Standard RV and Trailer Roof Vent Cover #MA00-933069 will not fit your Ventline E-Z Lift Ventadome Trailer Roof Vent #V3094-603-00C I recommend going with the Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover…

view full answer...

Answer 4

The Replacement Step Latch #MR97BR can only be used on the left side of a MORryde Step Above step.

view full answer...

Answer 5

The MaxxAir FanMate vent cover Item #MA00-955001 is going to be just a little taller but the louvred end tapers in and it does not come with the screen which is Item #MA00-955202. 25" long x 18-1/8" wide x 10-1/4" tall. The MaxxAir II…

view full answer...

Answer 6

The MAXX AIR II Vent Cover #MA86JR also listed as part number 00933082 that you referenced does not come with a bug screen built into it nor is there one available for it.

view full answer...

Answer 7

Yes, the MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip #MA86JR will work with the MaxxAir vents on your 2022 Grand Design Imagine travel trailer. If you do not have the EZClip mounting tabs on your vents already then you'll have to install…

view full answer...

Answer 8

For your application you need the Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles #AKHD-545-35-EZ-K to replace the Tru-Ryde RVD-H-545 trailer hub/drum assembly. This is designed for the industry standard #84 spindle so it uses inner bearing…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 12

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...