Replacement Hardware for Thule Mountaineer Cargo Box

Question

Question:

Hello I have a mountaineer and need to replace the mounting hardware due to the parts being rusted. What do you have as a replacement part kit? I will be mounting it on the yakima jet stream bars

asked by: Phil B

0

Expert Reply:

For replacement hardware for your Thule Mountaineer you can use the # 1032802. The plates look a little different but they have the same bolt hole spacing. If you want the quick on/off brackets you will also need 4 of the # TH04973. The protector pads # TH05001 are also available separately.

expert reply by: Robin H

0

Answer 1

I do have an option for you but there isn't any alternative mounting hardware specifically for the Thule Weekender Rooftop Cargo Box. That said, you should be able to retrofit another set like the Replacement Mounting Hardware for SportRack and…

view full answer...

Answer 2

I spoke with Thule, and they informed me that your Thule Frontier TH668TT cargo carrier is not able to be converted to be compatible with the EasySnap Mounting System. I know you aren't exactly a fan of the metal mounting hardware #SR04952 that…

view full answer...

Answer 3

The replacement mounting hardware for a Thule Weekender is the part #1032802 that you referenced. This box was discontinued before the 2020 CR-V was released so it was never test fit but I can't see why it wouldn't fit.

view full answer...

Answer 4

You will need to confirm the dimensions on your current mounting plate with the Replacement Plate Box Support for Adventurer Cargo Box #TH10378. I spoke to Thule and they could not confirm that it was the correct plate since there are different…

view full answer...

Answer 5

I think at some point the hardware that is now on your Weekender cargo box was added because that is not the original hardware for the box. The original hardware is actually the Quick Mount hardware #TH04997. The space between the outer holes on this…

view full answer...

Answer 6

According to my contact at Thule, the mounting hardware that came with the Thule Summit cargo box was designed to fit round, square and most factory installed crossbars. As long as the crossbars on your 2013 Ford Explorer are not wider than 3-5/8…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

We have exactly what you need for your Thule Summit! Take a look at the: -Replacement QM3 - Quick Mount Hardware - for Adventurer Cargo Box #TH04997. Even though it does not say it's for a Summit cargo box, this is the same hardware that was…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

The best hitch for a 2024 Subaru Outback is the etrailer item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 350 lbs…

view full answer...

Answer 11

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 12

I recommend the Thule WingBar Evo roof rack for your 2024 Subaru Outback Wilderness. For this you will need the Crossbars #TH711320 and Feet #TH710401. I prefer this system as the crossbars use a 2-piece channel seal which allows you to easily add…

view full answer...