bing tracking image
Q & A Icon

What Does Lippert Replacement Hydraulic Power Unit # LC141111  

Question:

i have a 1995 automate with a 13 ft. hydraulic slide. the slide works, but trips the breaker when going in or out. i have replaced the breaker 50 amp and the solenoid on the pump motor. it is a ground type system. the info on the pump, all thats readable says 12 volt. i runs a starter motor type pump. the switch in the trailer shifts a hyd valve to move the slide in or out. the motor always runs in the same direction. if the motor and /or pump is bad, will the lippert 141111 style unit be a good replacement, or is there another unit that would work better. thanks,

0

Expert Reply:

Do you have a Lippert hydraulic slide out setup? The # LC141111 work with the IRC slide out system but you would need to verify that's what you have. This is a direct replacement for your Haldex 9SP pump.

expert reply by:
0
Jameson C

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>

^

Recently Viewed Products

About Us
photos and videos
1,056,204
Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570
Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511
Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+
Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
78
Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357
Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.