Recommended Steering Stabilizer For A 2022 Forest River FR3 Class A Motorhome

Question

Question:

Part # for a steering stabilizer to fit a 2022 ForestRiver Fr3

asked by: Jeff M

0

Expert Reply:

A 2022 Forest River FR3 should be on an F53 chassis with a V-8 engine and have a GVWR under 22,000lbs so you would need the Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets for Class A Motorhomes # RM63RR.

If any of these options differ from your specific model then let me know and I can find the correct steering stabilizer to fit your motorhome. I've attached a video below where I'll walk you through the installation process, this is something you can easily do yourself.

expert reply by: Kevin C

0

Answer 1

We do have a Roadmaster steering stabilizer that fits your 2022 Coachmen Pursuit 27XPS motorhome, and I verified this fit directly with Roadmaster for you, with the correct part being the following. - Roadmaster Reflex Steering Stabilizer #RM63RR A…

view full answer...

Answer 2

It sounds to me like you're experiencing vehicle sway on your RV. To remedy this, I recommend installing a steering stabilizer like #RM82RR, and you can use the rear anti-sway bar like #RM83ZR to combat body roll. If you let me know what RV you…

view full answer...

Answer 3

The SumoSprings kit part #SSF-170-40-2 is a confirmed fit for your 2022 Forest River 30DS that is built on a Ford F-53 chassis. This is for the front axle so for the rear you'd need the #SSR-187-40-1. Then for a steering stabilizer you'd need…

view full answer...

Answer 4

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a 1…

view full answer...

Answer 5

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 6

The air suspension system on your 2022 Ram 2500 limits your options for suspension enhancement. None of the air bags made for your truck will be compatible. Instead, I recommend adding the SumoSprings Rebel Custom Helper Springs #SS64VR. The…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

Hey David, actually what is going to make the biggest improvement in handling and stability for your 2011 Itasca is an upgraded rear sway bar with the part #RM-1139-175. I know that's not what you asked about but for motorhomes where most of the…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

Personally I wouldn't go with Timbren's for your needs. They're essentially rubber bump stops that prevent your suspension from flexing when weights placed on the rear of your Canyon. The major issue with them is comfortability when you…

view full answer...

Answer 11

I would be happy to! To flat tow your 2024 GMC Canyon Denali you will need the following parts: Tow Bar and Safety Chains - Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights item #RM-676 Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit…

view full answer...