TorkLift Camper Tie-Downs & Receiver For 2004 Ford F-250 Short Bed Truck W/ Air Lift Helper Springs

Question

Question:

Looking for a Torklift Super hitch, Air bags, and frame mounted truck camper tie downs. 2004 F250 5.4, 6 3/4 bed, factory running boards to end of cab. I think I need TLF1002 AL57291 and LLF4007-LLR3503 Thank you for any help

asked by: Kevin B

0

Expert Reply:

Yes, the TorkLift SuperHitch Original Trailer Hitch Receiver # TLF1002 will fit your 2004 Ford F-250 with the 6-3/4' bed.

The Air Lift LoadLifter 5000 Air Helper Springs # AL57291 you found are designed to fit with the B&W fifth wheel hitch 1105 or 1199R. If you have either of these it will work on your F-250. Otherwise the Air Lift # AL57393 is the correct kit to fit your F-250. I do recommend considering either the Air Lift # AL88291 (for B&W) or Air Lift # AL88390 as these include the internal jounce bumpers. These internal bumpers help to absorb road shock and reduce bouncing with the truck camper loaded. The Air Lift WirelessAIR Compressor System # AL74000EZ will allow you to adjust the air springs from either a wireless remote or your smart phone using the Air Lift app. It also uses a smart manifold to monitor the air pressure in each spring for you and makes adjustments if it changes by more than 3psi while you are driving.

Since you are adding the TorkLift receiver I recommend using their Talon Custom Frame-Mounted Camper Tie-Downs Front # TLF2007A and Rear # TLR3503A. These create the strongest mount since they attach to the frame and not the bed and bumper like the HappiJac Truck-Mounted Camper Tie-Downs # LC182910-182971. You will need the TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs # TLS9529-2-LK to secure your camper to the Torklift tie-downs.

expert reply by: Bud M

0

Answer 1

I believe you are looking for HappiJac camper tie downs that fit a 2003 Ford F-250 which we offer as the part #LC182910-182971.

view full answer...

Answer 2

We currently only offer the bolts of the TorkLift SuperHitch Original Trailer Hitch Receiver #TLF1002 as a kit with the washers, nuts, etc. with part #TLM8003-F1002.

view full answer...

Answer 3

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 8

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The mounting holes in the No-Drill Mount Kit #F2530 don't line up perfectly to mount the Air Command II Xtreme Duty Compressor #F2549, but they are close enough that you can widen the holes a bit to accommodate the compressor and avoid drilling…

view full answer...

Answer 11

There's not many differences between the Air Lift WirelessONE item #AL25980EZ and item #AL25980. The main difference is that the item #AL25980EZ has a slightly higher CFM at 1.03 compared to 0.92 and it runs slightly more efficient at 9% over 15%…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...