Recommended Extended Weight Distribution Shank for 2" Hitches
Question:
Im looking for a extended ball mount for a equalizer hitch, that enables m E to open tailgate on pkp., when hooked up to trl. ,Thank you for your time
asked by: Blake L
Expert Reply:
It sounds like you need an extended shank for an Equalizer weight distribution system. There are only two options and I have listed them below. Both are 18" long and fit a 2" hitch receiver. They work with weight distribution systems that have a 600 lbs - 1,400 lbs tongue weight range. The end of the shanks will be 15" from the pin hole.
8" Rise, 4" Drop Equal-i-zer Weight Dist Shank item # EQ90-02-4600
7" Rise, 3" Drop Equal-i-zer Weight Dist Shank item # EQ90-02-4500
I have linked a picture and a review video below for you to take a look at. Hope this is what you are looking for. If you have any more questions feel free to email me back.
Products Referenced in This Question
Equal-i-zer Weight Dist Shank - 18" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1400 lbs TW
- Fits 2 Inch Hitch
- Equal-i-zer
- Square - 3 Inch Drop
- Square - 7 Inch Rise
- Equal-i-zer
more information >
Product Page this Question was Asked From
Equal-i-zer Weight Dist Shank - 18" Long - 8" Rise, 4" Drop - 600 to 1,400 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1600 lbs TW
- 16000 lbs GTW
- Fits 2 Inch Hitch
- Equal-i-zer
- Square - 4 Inch Drop
- Square - 8 Inch Rise
- Equal-i-zer
more information >
Continue Researching
- Video: Paneloc Heavy Duty Spring Latch Review
- Video: Review of Equal-i-zer Weight Distribution Hitch - Shank - EQ90-02-4500
- Shop: Equal-i-zer Weight Dist Shank - 18" Long - 8" Rise, 4" Drop - 600 to 1,400 lbs TW
- Shop: Equal-i-zer Weight Dist Shank - 18" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Shop: Spring Latch w/ Holdback for Trailer Tailgate - 2" x 1-1/8" - Zinc Plated - Right Hand
- Shop: Spring Latch w/ Extended Handle and Holdback - 2" x 1-1/8" - Zinc Plated - Left Hand
- Shop: Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 12,000 lbs GTW, 1,200 lbs TW
- Shop: Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 7" Rise, 3" Drop
- Shop: Equal-i-zer Weight Dist Shank - 12" Long - 10" Rise, 6" Drop - 600 to 1,400 lbs TW
- Q&A: Longest Shank for Weight Distribution System
- Q&A: Recommended Weight Distribution Shank for Towing w/ a Tailgate Down
- Q&A: How To Determine The Correct Rise/Drop For A Weight Distribution Shank For 2 Inch Hitch
- Q&A: Does Equal-i-zer Shank # EQ90-02-4500 Have Capacity for 8,000 lb Trailer
- Q&A: Can a Hitch Extender be Used With Weight Distribution System
- Q&A: Will the 18" Equal-i-zer Weight Dist Shank Increase Weight Capacity
- Q&A: Replacement Longer Shank for Fastway Weight Distribution System
- Search Results: cable locks
- Search Results: safety chains
- Search Results: hitch wobble
- Search Results: tailgate support
- Search Results: tailgate net
- Search Results: cargo net
- Article: Trailer Wiring Diagrams
- Search Results: 44649
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Hitch
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Fifth Wheel Hitch